Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Structural fibre-reinforced composites based on brittle matrices such as epoxy resins may be subject to short-term subcritical matrix damage that develops with time to the point where it may compromise the integrity of the structure. Currently, components ...
As part of the understanding of radiative coupling phenomena with ablation phenom- ena for hypersonic re-entry of Hayabusa or Stardust type of capsules, laboratory tests are very important. Only expansion tubes can reproduce flight conditions at these spee ...
Blends of commercial epoxy monomer with a 4,4'-diaminodiphenylsulfone hardener and poly(epsilon-caprolactone) (PCL) were evaluated for their potential as a self-healing matrix for fiber-reinforced composites, based on their room temperature toughness and s ...
In this work, the influence of ply thickness on strain energy release rate (ERR) in delamination of carbon epoxy laminates is addressed. Specimens with three ply thicknesses: 0.030, 0.075 and 0.150 mm are tested. While the ERR at onset of crack propagation ...
Materials exhibiting a gradient in permittivity are synthesized through the application of an external magnetic field to a suspension of Fe3O4@TiO2 nanoparticles in an epoxy matrix. It is shown how the application of the magnetic field not only induces the ...
Fiber Reinforced Composites (FRCs), due to their intrinsic heterogeneity, are generally affected by complex multi-scale failure mechanisms leading to the formation of matrix cracks that are difficult to detect and repair. FRCs with the ability to heal and ...
Glass used in buildings is often exposed to sources of surface damage which can have a significant effect on its strength. Existing research suggests that the flaws in glass can successfully be repaired by transparent polymeric resins, but the reasons for ...
An anisotropic magnetic nanocomposite has been prepared by incorporating magnetite nanoparticles (average size: 19nm) in titania (TiO2) particles with a typical size of about 100nm, which are sub- sequently dispersed in a liquid epoxy monomer cured under a ...
Thin polymer films that prevent the adhesion of bacteria are of interest as coatings for the development of infection-resistant biomaterials. This study investigates the influence of grafting density and film thickness on the adhesion of Staphylococcus epi ...
This paper presents detailed experimental information on mode-II delamination development in fibre/epoxy composite materials and provides observations about the process zone in the vicinity of the crack tip. It is shown that the energy dissipated in delami ...