Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of Graph Search.
Concept
Gas turbine locomotive
Summary
A gas turbine locomotive is a type of railway locomotive in which the prime mover is a gas turbine. Several types of gas turbine locomotive have been developed, differing mainly in the means by which mechanical power is conveyed to the driving wheels (drivers). A gas turbine train typically consists of two power cars (one at each end of the train), and one or more intermediate passenger cars.
A gas turbine offers some advantages over a piston engine. There are few moving parts, decreasing the need for lubrication and potentially reducing maintenance costs, and the power-to-weight ratio is much higher. A turbine of a given power output is also physically smaller than an equally powerful piston engine, so that a locomotive can be extremely powerful without needing to be inordinately large.
However, a gas turbine's power output and efficiency both drop dramatically with rotational speed, unlike a piston engine, which has a comparatively flat power curve. This makes GTEL systems useful primarily for long-distance high-speed runs. Additional problems with gas turbine-electric locomotives include the fact that they are very noisy and produce such extremely hot exhaust gasses that, if the locomotive were parked under an overpass paved with asphalt, it could melt the asphalt.
A gas turbine locomotive was patented in 1861 by Marc Antoine Francois Mennons (British patent no. 1633). The drawings in Mennons' patent show a locomotive of 0-4-2 wheel arrangement with a cylindrical casing resembling a boiler. At the front of the casing is the compressor, which Mennons calls a ventilator. This supplies air to a firebox and the hot gases from the firebox drive a turbine at the back of the casing. The exhaust from the turbine then travels forwards through ducts to preheat the incoming air. The turbine drives the compressor through gearing and an external shaft. There is additional gearing to a jackshaft which drives the wheels through side rods. The fuel is solid (presumably coal, coke or wood) and there is a fuel bunker at the rear.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.