Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
This dissertation addresses the development of a Solid Freeform Fabrication process, Selective Laser Pyrolysis, to fabricate three-dimensional porous ceramic preforms from ceramic powders and preceramic polymers. It contributes to a better understanding of ...
This thesis addresses the link between capillarity parameters, i.e. surface tension and contact angle, and the infiltration of porous preforms with molten metal by pressure infiltration The method used is to conduct pressure infiltration experiments of sel ...
The present work is aimed at assessing the feasibility of integrating thermoplastic polypropylene nanocomposite matrices into conventional fiber-reinforced composites based on hybrid textiles that incorporate both the matrix and glass-fiber yarns, in order ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Carbon fiber reinforced polymer composites (CFRPs) are inherently multifunctional materials that, in addition to their primary function as a structural material, allow for the sensing and monitoring of in situ damage nucleation and evolution by the measure ...
Particle reinforced metal matrix composites are manufactured by high-pressure infiltration. These composites contain roughly 50% by volume of discrete alumina inclusions dispersed homogeneously in a continuous aluminium-based matrix. Three matrices, namely ...
This paper presents a new concept for a lightweight hybrid- FRP bridge deck. The sandwich construction consists of three layers: a fiber-reinforced polymer composite (FRP) sheet with T-upstands for the tensile skin, lightweight concrete (LC) for the core a ...
High temperature plasticity of fine-grained ceramics (ZrO2, Al2O3, etc) is usually associated with a grain boundary sliding process. The aim of the present research is then to improve the high-temperature mechanical strength of polycrystalline zirconia (3Y ...
Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2008
A durability study was performed on a pultruded glass fiber reinforced polymer (GFRP) compression element of a hybrid GFRP/steel joint for concrete structures. GFRP elements were immersed in alkaline pore water solutions of different temperatures during 18 ...