Pill (textile)

Related publications (13)

About
Privacy
Disclaimer

Graph Chatbot

Impact of Brightness on Glare Perception when Using Shading Fabrics

Marilyne Andersen, Jan Wienold, Caroline Karmann

Access to daylight and views out are usually recognized as beneficial to occupant comfort at the workplace. Simultaneously, discomfort glare due to direct sunlight is a known source of occupant dissatisfaction. Shading fabrics with low openness factor have ...

PLEA2022

Influence of depositional fabric on mechanical properties of naturally deposited sands

Gioacchino Viggiani, Edward Carlo Giorgio Andò

Fabric characteristics and shear deformation behaviour were analysed in four intact small-scale samples, including two disturbed and two undisturbed samples of naturally deposited sand from a shoal in the San Francisco Bay. Triaxial compression tests were ...

ICE PUBLISHING2022

Nano-sized iron oxides supported on polyester textile to remove fluoroquinolones in hospital wastewater

Sami Rtimi

In this study, we examined the removal kinetics of two fluoroquinolones (FQs), flumequine (FLU) and ciprofloxacin (CIP), in synthetic wastewater (SWW) and real hospital wastewater (RHW) using FeOx thin films, peroxymonosulfate (PMS) and visible light. Nano ...

ROYAL SOC CHEMISTRY2020

Assessment of capillary phenomena in liquid composite molding

Véronique Michaud, Baris Çaglar, Feyza Karasu Kiliç, Cem Tekin

The interplay between capillary and viscous forces plays a significant role for optimal part quality in fiber-reinforced composites manufactured by Liquid Composite Molding (LCM); these are however difficult to analyze during flow. Two approaches are propo ...

2019

In-plane permeability distribution mapping of isotropic mats using flow front detection

Véronique Michaud, Baris Çaglar, Damiano Salvatori

In-plane permeability of textile fabrics is often characterized by one-dimensional rectilinear flow experiments, displaying limitations related to potential race-tracking effects and the need to run experiments at several fiber volume fractions. We propose ...

2018

Permeability of textile fabrics with spherical inclusions

Véronique Michaud, Baris Çaglar

We investigated the effect of rigid spherical inclusions such as microcapsules and fillers on the permeability of fabrics by using glass beads as model inclusions. Beads with a range of diameters (40-800 mu m) and volume fractions (2.5-10%) were sieved bet ...

Elsevier2017

Comparison of HIPIMS sputtered Ag- and Cu-surfaces leading to accelerated bacterial inactivation in the dark

César Pulgarin, Juan Kiwi, Sami Rtimi, Oualid Baghriche

Recently, compact uniform and adhesive films of Ag and Cu have been prepared by DC-magnetron sputtering (DC), pulsed DC magnetron sputtering (DCP) and high power impulse magnetron sputtering (HIPIMS). This study reports the HIPIMS deposition for Ag and Cu ...

Elsevier Science Sa2014

Timberfabric: Innovative Lightweight Structures

Yves Weinand, Markus Hudert

The research project “Structural Timber Fabric: Applying Textile Principles on Building Scale” follows an innovative and experimental approach to develop novel lightweight timber structures. It examines structural and aesthetic qualities of textiles and te ...

2011

Structural Timber Fabric: Applying Textile Principles on Building Scale

Yves Weinand, Markus Hudert

Textiles are interesting from both a structural and an architectural point of view. Their patterns and textures, created by the interworking of yarn elements, are not only highly appealing on an aesthetical level, they also possess load bearing qualities. ...

CRC Press/Balkema Taylor & Francis Group2010

Preparation, testing and performance of a TiO2/polyester photocatalyst for the degradation of gaseous methanol

César Pulgarin, Juan Kiwi

TiO2 modified polyester photocatalysts were prepared by immersion. drying and curing of the polyester in TiO2 containing suspensions under different experimental conditions. The structure of TiO2 layers on the polyester varied according to the time of imme ...

2010

Page 1 of 2