Eugen Brühwilerbirth date: 19.11.1958 nationality: Swiss (native from Dussnang, Canton of Thurgau) Education : - July 1988 : doctoral degree from the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland with a thesis entitled Fracture mechanics of dam concrete subjected to quasi-static and seismic loading conditions - December 1983 : civil engineering diploma (university degree) from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland Professional Experience : - Since 1st April 1995 : Professor of Structural Engineering at EPFL and Head of the Laboratory of Maintenance, Construction and Safety for Civil Structures (MCS) (often considered being the first chair worldwide devoted exclusively to existing civil structures). - 1991-94 Project Manager and structural engineer with the Swiss Federal Railways (SBB), Division of Bridges and Structures, Zurich: Monitoring and maintenance of bridges and structures, Project manager and checking engineer for the construction of new bridges and rehabilitation of existing bridges. - 1989/90 Research associate at the Department of Civil Engineering, University of Colorado, Boulder, USA : Fracture mechanics of concrete and fracture of concrete dams. - 1986-88 Doctoral student at EPFL-LMC (Building Materials, Prof. Wittmann) : Fracture mechanics of concrete, fracture of concrete dams under seismic loading - 1984/85 Research engineer at EPFL-ICOM (Steel Structures, Prof. Badoux and Prof. Hirt) : Fatigue behaviour and fracture mechanics of riveted bridges
Philippe SpätigPhilippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.
Dimitrios LignosProf. Lignos joined the École Polytechnique Féderale de Lausanne (EPFL) in 2016 from McGill University in Canada where he was a tenured Associate Professor and a William Dawson Scholar for Infrastructure Resilience. He holds a diploma (National Technical University of Athens, NTUA, 2003), M.S. (Stanford University, 2004) and Ph.D. (Stanford University, 2008). In addition, he was a post-doctoral scientist at Stanford University (2009) and in Kyoto University (2010). Prof. Lignos teaches graduate and undergraduate courses in seismic design, nonlinear behaviour of steel and composite structures as well as supplemental damping systems, Structural Stability, Nonlinear Analysis and Performance-based Earthquake Engineering. His awards for teaching, research and service in Civil Engineering include the 2011 Outstanding Teaching Award (Faculty of Engineering, McGill University), as well as the Outstanding reviewer (2012, 2013) award from ASCE, the 2013 State-of-the-Art in Civil Engineering Award by ASCE and the 2014 Christophe Pierre Award for Research Excellence - Early Career. Just recently, he received the 2019 Walter L. Huber Civil Engineering Research Prize from ASCE for significant contributions in developing state of the art methods to simulate extreme limit states in steel structures.Prof. Lignos is a member of ASCE and the Earthquake Engineering Research Institute. He acts as an Associate Editor for Metal Structures and Seismic Effects of the ASCE Journal of Structural Engineering. He joined the Editorial Board of Earthquake Spectra and Earthquake Engineering and Structural Dynamics International journals. He serves as an acting member of the CEN/TC 250/SC 8/WG 2 and has been selected as a member of the Project Team (PT2) for the Eurocode 8-Part 1 Current Revisions for Steel and Composite Structures. He is also a member of the Canadian Standards Association (CSA) S16 technical committee for Steel Structures. Prof. Lignos is involved as a NEHRP consultant in numerous research-to-practice projects related to the behaviour and nonlinear modelling and analysis of structures applicable to the engineering practice through the Applied Technology Council (ATC). Detailed Curriculum Vitae (last update September 2018)
Emmanuel DenariéEmmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures. In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 