Related people (19)
Jean-Marie Drezet
1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056  2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191  2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project)  2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project)  2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project)
Michel Rappaz
After a PhD in solid state physics (1978) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and a post-doc at Oak Ridge National Laboratory, Michel Rappaz joined the Institute of Materials of EPFL in 1981. After two years in an engineering company, he came back to EPFL in 1984 where he was nominated Adjunct Professor in 1990 and Full Professor in 2003. He retired from EPFL in 2015 and is now Emeritus Professor and independent consultant for several industries and research centres. His main interests are in phase transformations and solidification, in particular the coupling of macroscopic aspects of heat and mass transfer with microscopic aspects of microstructure and defect formation. Among his diverse achievements, one can mention in particular the development of cellular automata for grain structure predictions and of granular models for hot tearing formation in castings, the coupling of Finite Element method with microscopic models of nucleation and growth, the application of the phase field method to the understanding of various microstructures, the discovery of quasicrystal mediated-nucleation in alloys, and many other studies both fundamental at the microstructure-defect level and more applied at the level of processes. Some of the software developments have been commercialized by a spin-off company founded by his group in 1991 (Calcom SA), now part of the French company ESI. Michel Rappaz initiated in 1992 an annual postgraduate course on solidification which has been attended by more than 900 participants from all over the world. He is presently collaborating closely with another spin-off company started from his group, Novamet SàrL. Michel Rappaz has received several awards, in particular the Mathewson co-author award (1994) and author award (1997) of the American Mineral, Metals and Materials Society (TMS), the Koerber foundation award jointly with Profs Y. Bréchet and M. Asbby (1996), the Sainte-Claire Deville Medal (1996) and the Grand Medal (2011) from the French Materials Society, the Bruce Chalmers Award of TMS (2002), the Mc Donald Memorial Lecture award of Canada (2005), the FEMS European Materials Gold Medal (2013) and the Brimacombe Prize of TMS (2015). He is a highly-cited author of ISI, a fellow of ASM, IOP and TMS, and has co-authored more than 200 publications and two books.
Karen Scrivener
De nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Lyesse Laloui
Director, EPFL Soil Mechanics LaboratoryDirector, EPFL Civil Engineering SectionEditor in Chief, ElsevierMember of the Swiss Academy of Engineering SciencesFounding Partner, Geoeg & MeduSoilActive in academic research in the following institutions: Lausanne, EPFL, Durham, Duke University, Nanjing, Hohai UniversityProfessor Lyesse Laloui teaches at EPFL, where he directs the Soil Mechanics Laboratory as well as the Civil Engineering Section. He is a founding partner of the international engineering company Geoeg, and the start-up MeduSoil. In addition, he is an adjunct professor at Duke University, USA and an advisory professor at Hohai University, China as well as honorary director of the International Joint Research Center for Energy Geotechnics in China.He is the recipient of an Advance ERC grant for his BIO-mediated GEO-material Strengthening project. Editor in Chief of the Elsevier Geomechanics for Energy and the Environment journal, he is a leading scientist in the field of geomechanics and geo-energy. He has written and edited 13 books and published over 320 peer reviewed papers; his work is cited more than 6000 times with an h-index of 39 (Scopus). Two of his papers are among the top 1% in the academic field of Engineering. He has given keynote and invited lectures at more than 40 leading international conferences. He has received several international awards (IACMAG, RM Quigley, Roberval) and delivered honorary lectures (Vardoulakis, Minnesota; G.A. Leonards, Purdue; Kersten, Minnesota). He recently acted as the Chair of the international evaluation panel of Civil and Geological Engineering R&D Units of Portugal.Nov. 2019 For further information visit www.epfl.ch/labs/lms/ ;  geoeg.net ; medusoil.com
Andreas Mortensen
Andreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor.  His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents.  Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme d’Ingénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISI’s Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Emmanuel Denarié
Emmanuel Denarié is a civil engineer, with a PhD in Materials Science. He worked for 3 years in a civil engineering company where he was in charge of the design of structures and the maintenance of bridges. He has 30 years’ experience on research and applications in the field of building materials, advanced concretes, and rehabilitation of reinforced concrete structures. He is since 2000 senior scientist and lecturer in the Laboratory for Maintenance and Safety of structures, at Ecole Polytechnique Fédérale de Lausanne (EPFL), in charge of research and development activities on the application of concretes and advanced cementitious materials to the improvement of existing and new structures.  In 2013, under the lead of Emmanuel Denarié, in cooperation with CEREMA, Subdivision des Phares et Balises from Lorient, and Lafarge, a turret at sea (Le Cabon, Brittany, France) was reinforced by a cast on site 60 mm thick UHPFRC shell. The strain hardening mix was developed jointly with Lafarge. This successful application in extreme conditions of access and restraint of the substrate (thin ring geometry) opened the way to large-scale industrial applications of UHPFRC for the reinforcement of existing structures.
Peter Ryser
Dr. Peter Ryser is a Professor Emeritus at the Swiss Federal Institute of Technology in Lausanne. He has over three decades of research and teaching experience from various corporate and academic institutions. He was previously a Director at Siemens Building Technologies where he was responsible for R&D, product innovation and patents. Dr. Ryser has a Ph.D. in applied Physics from the University of Geneva, a Masters degree in Experimental Physics and an MBA.
Wilfried Kurz
Wilfried Kurz is Professor Emeritus of Materials Science at "Ecole Polytechnique Fédérale de Lausanne, EPFL" (the Swiss Federal Institute of Technology Lausanne). He received his diploma and doctor’s degree from University of Leoben, Austria. In 1964 he joined the staff of the Battelle Geneva Research Laboratories, which he left in 1971 as head of the physical metallurgy group. In the same year he was appointed at the Swiss Federal Institute of Technology, where, until his retirement in 2003, he directed the Laboratory of Physical Metallurgy as well as of the Laser Materials Processing Centre. After participating in 1972/73 in the foundation of the curriculum in Materials Science and Engineering at EPFL he was twice Head of Department. Under others he served as president of SVMT (Swiss Assoc. for Materials Science & Technology) and of FEMS, the Federation of European Materials Societies. Author of four books, he published some 250 papers and patents, principally on the science and technology of solidification microstructures and processes. Professor Kurz is corresponding member of the Austrian Academy of Sciences, highly cited researcher and the recipient of awards from Eisenhuette Oesterreich; The Minerals, Metals & Materials Society (TMS, USA); ASM International, USA; Société Française de Métallurgie et de Matériaux; Deutsche Gesellschaft fuer Materialkunde; Institute of Materials, Minerals and Mining, London; Associatione Italiana di Metallurgia; People’s Republic of China; Federation of European Materials Societies; and Iron and Steel Institute of Japan. Selected publications of recent years: “Fundamentals of Solidification”, W. Kurz, DJ Fisher, Trans Tech Publ., Switzerland,, 4th revised edition 1998, 305 p “Solidification”, H Müller-Krumbhaar, W Kurz, E Brener, in: Phase Transformations in Materials, G Kostorz, ed., Wiley-VCH, 2001, p.81-170 “Single-crystal laser deposition of superalloys: Processing-microstructure maps”, M Gäumann, C Bezencon, P Canalis, W Kurz, Acta Mater., 49 (2001) 1051-1062 “Solidification microstructure – processing maps: Theory and application”, W Kurz, Adv. Eng. Mater., 3 (2001) 443-452 “Dendritic growth”, W Kurz, R Trivedi, in: Proc. MC Flemings Symposium on Solidification and Materials Processing, eds R Abbaschian, H Brody, A Mortensen, TMS, Warrendale, PA, 2001, p. 87-99 “Massive Transformation and Absolute Stability“, M. Lima, W. Kurz, Metall. Mater. Trans. 33A (2002) 2337-2345 “Introduction to Materials Science”, JP Mercier, G Zambelli, W Kurz, Elsevier, Paris, 2002, 461 p. “Epitaxial deposition of MCrAlY coatings on a Ni-base superalloy by laser cladding”, C Bezencon, A Schnell, W Kurz, Scripta Mater. 49 (2003) 705-709 “Peritectic Coupled Growth”, S Dobler, TS Lo, M Plapp, A Karma, W Kurz, Acta Mater., 52 (2004) 2795-2808 “Solidification cracking of superalloy single- and bi-crystals”, N Wang, S Mokadem, M Rappaz, W Kurz, Acta Mater., 52 (2004) 3173-3182 “Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations”, S Mokadem, C Bezencon, A Hauert, A Jacot, W Kurz, Metall. Mater. Trans. 38A (2007) 1500-1510 “Plane Front Solidification”, W. Kurz, ASM Handbook Vol. 15: Casting, 2008, 293-298 “Solidification microstructures and solid-state parallels: Recent developments, future directions”, M Asta, C Beckermann, A Karma, W Kurz, R Napolitano , M Plapp, G Purdy, M Rappaz, R Trivedi, Acta Mater., 57 (2009) 941–971 “Solute Trapping-Free Massive Transformation at Absolute Stability”, A. Jacot, M. Sumida, W. Kurz, Acta Mater. 59 (2011) 1716-1724
Yves Leterrier
Yves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities 2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability' Background 1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.