Symbol rate

Summary

In a digitally modulated signal or a line code, symbol rate, modulation rate or baud rate is the number of symbol changes, waveform changes, or signaling events across the transmission medium per unit of time. The symbol rate is measured in baud (Bd) or symbols per second. In the case of a line code, the symbol rate is the pulse rate in pulses per second. Each symbol can represent or convey one or several bits of data. The symbol rate is related to the gross bit rate, expressed in bits per second. Symbols A symbol may be described as either a pulse in digital baseband transmission or a tone in passband transmission using modems. A symbol is a waveform, a state or a significant condition of the communication channel that persists, for a fixed period of time. A sending device places symbols on the channel at a fixed and known symbol rate, and the receiving device has the job of detecting the sequence of symbols in order to reconstruct the transmitted data. There may be a dir

Official source

https://en.wikipedia.org/wiki/Symbol_rate

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (23)

Related publications

Related people (1)

Related people

Related units (1)

Related units

Related concepts (37)

Related concepts

Related courses (6)

Related courses

Related lectures (16)

Related lectures

Performance analysis of dual-hop fixed-gain AF relaying systems with OSTBC over Nakagami-m fading channels

Serife Seda Kucur

In this paper, we present outage probability and symbol error rate (SER) performance analyses of a dual-hop transmission using fixed-gain amplify-and-forward relaying in flat Nakagami-m fading channels. The system under consideration is equipped with multiple antennas at source and destination adopting orthogonal space-time block coding to provide transmit diversity and maximum ratio combining to provide receive diversity, respectively. For integer and half-integer m values, closed forms of exact outage probability and moment generating function (MGF) expressions are derived through cumulative distribution function (CDF) of the overall system signal-to-noise ratio. Closed-form exact SER expressions based on the overall CDF are obtained for binary phase shift keying, binary frequency shift keying and M-ary pulse amplitude modulation. Exact SER expressions based on the MGF method are also obtained for binary differential phase shift keying, M-ary phase shift keying and M-ary quadrature amplitude modulation. Moreover, the asymptotic diversity order analysis is performed through derivations of asymptotic outage probability and SER. Theoretical analyses are validated by Monte Carlo simulations showing perfect match between each other. (C) 2012 Elsevier GmbH. All rights reserved.

Elsevier Gmbh, Urban & Fischer Verlag2012

We demonstrate high speed optical transmission systems using digital coherent detection at all-electronically multiplexed symbol rates of 80 and 107 Gbaud. At 107 Gbaud, we demonstrate a single-carrier polarization division multiplexed quadrature phase shift keyed (PDM-QPSK) line rate of 428 Gb/s. At 80 Gbaud, we achieve a single-carrier line rate of 640 Gb/s using PDM 16-ary quadrature amplitude modulation (16-QAM). Using two optical subcarriers, we demonstrate a 1-Tb/s optical interface and conduct long-haul wavelength-division multiplexed (WDM) transmission on a 200-GHz grid over 3200 km of ultra-large effective area fiber.

Ieee-Inst Electrical Electronics Engineers Inc2014

26.3 A pin- and power-efficient low-latency 8-to-12Gb/s/wire 8b8w-coded SerDes link for high-loss channels in 40nm technology

Harm Cronie, Klaas Lammert Hofstra, Kia Salimi, Mohammad Amin Shokrollahi, Anant Pratap Singh, Christoph Walter

The continuing demand for higher bandwidth in serial interconnects has pushed the symbol rate of differential lanes into the high-insertion-loss region of channels. Multi-level signaling such as differential PAM-4 [1] has been used to mitigate the loss of electrical channels by lowering the signal spectrum. Such an approach suffers from lower SNR tolerance as well as higher susceptibility to crosstalk and ISI as compared to differential signaling (DS). Coded differential approaches have been reported [2] to mitigate ISI. Our approach is a generalization of DS in which ternary values are transmitted on an 8-wire bus. The set of transmitted values belongs to a code consisting of 256 code-words called the 8b8w-code (8-bits-on-8-wires) [3]. The specific correlations in the code-words of the 8b8w-code eliminate transmit common-mode and simultaneous switching output (SSO) noise and allow for detection via self-referencing comparators (unlike PAM-4), which provides additional noise immunity. Compared to DS, the 8b8w-code offers twice the throughput at 50% of the line power. Compared to PAM-4, the code offers better SNR (3dB) at 38% of the line power with enhanced tolerance of ISI and lower crosstalk generation. The design and experimental verification of an 8b8w transceiver in 40nm CMOS is described. Transmission is achieved up to 12Gb/s per wire over 55cm of Rogers with up to 15dB loss.

2014