Concept

Series and parallel circuits

Related publications (149)

Ultra-High-Voltage (7-kV) Bidirectional Flyback Converter Used to Drive Capacitive Actuators

Yves Perriard, Alexis Boegli, Morgan Almanza, Raphaël Johannes Charles Mottet, Lucas Pniak

Dielectric elastomer actuators (DEAs) have extremely advantageous characteristics such as lightness, compactness, flexibility, and large displacements. However, in order to operate, they can require voltages in the order of several thousands of volts. Thus ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Seismic control performance of a three-story frame prototype equipped with semi-active variable stiffness and damping structural joints

Gennaro Senatore

This paper presents numerical and experimental studies on semi-active seismic response control of structures equipped with variable stiffness and damping structural joints. Such adaptive joints, which are comprised of a shape memory polymer (SMP) core rein ...

WILEY2021

High Frequency Operation of Series-Connected IGCTs for Resonant Converters

Drazen Dujic, Gabriele Ulissi

Series connected IGCTs find application in hard-switched commercial power converters at the MW power levels. Expanding the application of these devices to medium voltage dc-dc resonant converters is of great interest due to the IGCTs low conduction losses. ...

2021

Quasi-vertical GaN-on-Si reverse blocking power MOSFETs

Elison de Nazareth Matioli, Alessandro Floriduz, Riyaz Mohammed Abdul Khadar, Chao Liu

We demonstrate quasi-vertical reverse blocking (RB) MOSFETs on 6.7 mu m thick GaN grown on a 6 inch Si substrate by metalorganic chemical vapor deposition. The RB capability was achieved by replacing the ohmic drain with a quasi-vertical Schottky drain, re ...

IOP PUBLISHING LTD2021

Analysis of the Effectiveness of the Series Inductor Integration Into the MFT for SST Applications

Drazen Dujic, Marko Mogorovic

This paper analyzes the effectiveness of the integration of the series inductor into the medium frequency transformer used for series resonant or dual active bridge converters - galvanically isolated DC-DC converters for high-power medium-voltage (solid st ...

2020

3D Smith chart constant quality factor semi-circles contours for positive and negative resistance circuits

Mihai Adrian Ionescu, Andrei Müller

The article firstly proves that the constant quality factor (Q) contours for passive circuits, while represented on a 2D Smith chart, form circle arcs on a coaxal circle family. Furthermore, these circle arcs represent semi-circles families in the north he ...

2020

Investigation of Electromagnetic Field Coupling to a Transmission Line Terminated with Non- Vertical Risers

Marcos Rubinstein, Jun Guo

Recently, a simple and efficient method was proposed to take into account non-vertical risers at the end of transmission lines through an equivalent partial inductance. This paper evaluates the frequency above which the inductance needs to be taken into ac ...

URSI2020

Modeling of Quench Protection Concepts for Canted-Cosine-Theta Type High-Field Magnets

Andreas Pautz, Bernhard Auchmann, Jiani Gao

An innovative high-field superconducting magnet of Canted-Cosine-Theta (CCT) type has been proposed for Future Circular Collider 16 T dipole magnet design. The unique mechanical structure intercepts the accumulated forces lowering the stress on the winding ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

Straight to the Point: Intra- and Intercluster LUT Connections to Mitigate the Delay of Programmable Routing

Paolo Ienne, Grace Zgheib, Stefan Nikolic

Technology scaling makes metal delay ever more problematic, but routing between Look-Up Tables (LUTs) still passes through a series of transistors. It seems wise to avoid the corresponding delay whenever possible. Direct connections between LUTs, both with ...

ASSOC COMPUTING MACHINERY2020

X-point potential well formation in diverted tokamaks with unfavorable magnetic field direction

Basil Duval, Holger Reimerdes, Joaquim Loizu Cisquella, Marco Wischmeier, Mirko Wensing

Fluid simulations of the boundary of fusion plasmas predict the formation of an electric potential well in the vicinity of the X-point in detached divertor conditions with Bt in the unfavorable direction for H-mode access. This potential well arises when t ...

2020

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.