Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic ...
Owing to its porous cellular structure and polymeric components, wood can be easily shaped in its transversal direction when it is heated and has sufficient water content. Thanks to this thermohydrous behaviour many manufacturing processes such as densific ...
Wood fiber-reinforced polylactic acid composite foams have been successfully produced using supercritical carbon dioxide. The addition of fibers had a strong effect on microstructure of the foams. An increase in wood fiber content implied smaller average c ...
Mechanical and fracture behaviors of wood are defined by the morphology and mechanical properties of wood fibers and their bonding medium. Parallel orientation of wood fibers makes them the most influential microstructural elements from the mechanical poin ...
Friction welding is a new technology in the course of which wood pieces are subjected to circular or linear movements in a welding machine. The wood in the contact zone is heated and melted. Aiming at a better understanding of the thermal alteration of woo ...
The catalytic influence of major metal species found with waste wood (Na, K, Ca, Mg, Zn, Pb, Cu) was studied during the gasification of nitrate salt impregnated charcoal with CO2 at 800degreesC in the kinetically controlled regime. In contrast with literat ...
In the architecture, engineering and construction (AEC) sector, the use of point cloud data is not a novelty. Usually employed to retrieve data for inspecting construction sites or retrofitting pre-existing buildings, sensors like LiDAR cameras have been k ...
Association for Computer-Aided Architectural Design Research in Asia (CAADRIA)2022
This paper introduces the conceptual design of sustainable timber structures using raw wood. It pre-sents a workflow for systematically generating Nexorades using a tiling method for multi-valence quad subdivided surfaces. The system is designed based on a ...