Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Wolf-Dieter Schneider
-
Dipl.Phys., University of Bonn, 1971
-
PhD (Dr. rer. nat.), University of Bonn, 1975
-
Ass. Prof., University of Campinas 1976
-
Ass. Prof., Free University of Berlin, 1977
-
Privat-docent, Free University of Berlin 1982
-
Privat-docent, University of Neuchâtel 1985
-
Full Prof., Université de Lausanne, 1989
-
Full Prof., EPFL, 2003
He worked at the Universities of Bonn (Germany), Uppsala (Sweden), Campinas(Brasil), Free University of Berlin (Germany), Wisconsin, Madison (USA), Neuchatel (Switzerland), Manoa, Honululu, Hawaii (USA) and Lausanne (Switzerland). Since 2003 he is full professor at the EPFL (Switzerland) in Lausanne.
Research group established at the University of Lausanne in 1989
Research activity:
Nanoscience Scanning tunneling microscopy and spectroscopy supported nanostructures Michel RappazAfter a PhD in solid state physics (1978) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and a post-doc at Oak Ridge National Laboratory, Michel Rappaz joined the Institute of Materials of EPFL in 1981. After two years in an engineering company, he came back to EPFL in 1984 where he was nominated Adjunct Professor in 1990 and Full Professor in 2003. He retired from EPFL in 2015 and is now Emeritus Professor and independent consultant for several industries and research centres.
His main interests are in phase transformations and solidification, in particular the coupling of macroscopic aspects of heat and mass transfer with microscopic aspects of microstructure and defect formation. Among his diverse achievements, one can mention in particular the development of cellular automata for grain structure predictions and of granular models for hot tearing formation in castings, the coupling of Finite Element method with microscopic models of nucleation and growth, the application of the phase field method to the understanding of various microstructures, the discovery of quasicrystal mediated-nucleation in alloys, and many other studies both fundamental at the microstructure-defect level and more applied at the level of processes.
Some of the software developments have been commercialized by a spin-off company founded by his group in 1991 (Calcom SA), now part of the French company ESI. Michel Rappaz initiated in 1992 an annual postgraduate course on solidification which has been attended by more than 900 participants from all over the world. He is presently collaborating closely with another spin-off company started from his group, Novamet SàrL.
Michel Rappaz has received several awards, in particular the Mathewson co-author award (1994) and author award (1997) of the American Mineral, Metals and Materials Society (TMS), the Koerber foundation award jointly with Profs Y. Bréchet and M. Asbby (1996), the Sainte-Claire Deville Medal (1996) and the Grand Medal (2011) from the French Materials Society, the Bruce Chalmers Award of TMS (2002), the Mc Donald Memorial Lecture award of Canada (2005), the FEMS European Materials Gold Medal (2013) and the Brimacombe Prize of TMS (2015). He is a highly-cited author of ISI, a fellow of ASM, IOP and TMS, and has co-authored more than 200 publications and two books.
Franz-Karl ReinhartOriginaire d'Oberdorf (SO), Franz-Karl Reinhart est né à Bassersdorf (ZH) le 12 juillet 1933. Diplômé ingénieur électricien à l'Ecole polytechnique fédérale de Zurich en 1958, il obtient son doctorat ès sciences techniques à l'Institut d'électronique avancée de l'EPFZ en 1962.
En 1963, il est membre du "Technical Staff" du Laboratoire de recherche en électronique à l'état solide chez Bell, à Murray Hill (New Jersey) aux Etats-Unis. Il s'intéresse à l'optique des ondes guidées, particulièrement à la modulation électro-optique dans les guides d'onde à jonction p-n, aux lasers semiconducteurs à injection et à l'optique intégrée monolithique. Depuis mars 1983, il est professeur ordinaire d'optoélectronique à l'Institut de physique appliquée et, depuis octobre 1987, à l'Institut de micro- et optoélectronique de l'EPFL. Il enseigne dans les domaines de l'optique et de la physique du solide. Il a développé les bases d'un laboratoire d'optoélectronique et de supraconductivité à haute température de transition.
Il s'intéresse principalement à la physique des semiconducteurs, à la supraconductivité et aux applications industrielles. Son activité primaire consiste en la préparation et l'étude de nouveaux matériaux et dispositifs quantiques pour les applications en micro- et optoélectronique.
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
