Concept

Acoustical engineering

Related publications (127)

Vapor compression and energy dissipation in a collapsing laser-induced bubble

Mohamed Farhat, Danail Obreschkow, Davide Bernardo Preso, Armand Baptiste Sieber

The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the ...
Melville2024

Robust tunable acoustic impedance control on electroacoustic resonators for aircraft noise reduction

Maxime Volery

Air traffic noise emissions are responsible for a significant part of the overall environmental noise, especially in the vicinity of airports. Exposure to environmental noise is known to negatively impact health and to be associated with cardiovascular dis ...
EPFL2023

Smart acoustic lining for UHBR technologies engine: from the design of an electroacoustic metasurface to experimental characterization under flow

Hervé Lissek, Maxime Volery

The SALUTE project aims at evaluating performance of electroacoustic metasurface, employing a surface array of controlled electroacoustic actuators, for smart acoustic lining under grazing turbulent flow to be used in UHBR Technologies Engines. Theoretical ...
Society of Photo-Optical Instrumentation Engineers (SPIE)2023

Perfluorocarbon emulsion enhances MR-ARFI displacement and temperature in vitro: Evaluating the response with MRI, NMR, and hydrophone

Mohamed Farhat, Davide Bernardo Preso, Ryan Holman

Sonosensitive perfluorocarbon F(8)TAC(18)-PFOB emulsion is under development to enhance heating, increase thermal contrast, and reduce treatment times during focused ultrasound tumor ablation of highly perfused tissue. The emulsion previously showed enhanc ...
FRONTIERS MEDIA SA2023

Ultrabroadband sound control with deep-subwavelength plasmacoustic metalayers

Romain Christophe Rémy Fleury, Hervé Lissek, Stanislav Sergeev

Controlling audible sound requires inherently broadband and subwavelength acoustic solutions, which are to date, crucially missing. This includes current noise absorption methods, such as porous materials or acoustic resonators, which are typically ineffic ...
2023

PID-like active impedance control for electroacoustic resonators to design tunable single-degree-of-freedom sound absorbers

Hervé Lissek, Maxime Volery, Xinxin Guo

Sound absorption at low frequencies still remains a challenge in both scientific research and engineering practice. Natural porous materials are ineffective in this frequency range, as well as acoustic resonators which present too narrow bandwidth of absor ...
2022

In flow acoustic characterisation of a 2D active liner with local and non local strategies.

Hervé Lissek, Maxime Volery, Gaël Matten

The design and the grazing flow aeroacoustical characterization of a 2D active liner based on an array of electroacoustic absorbers are presented in this paper. The strategy stands on a pressure-based, current-driven digital architecture for impedance cont ...
2022

A phenomenological extended-reaction boundary model for time-domain wave-based acoustic simulations under sparse reflection conditions using a wave splitting method

Jan Sickmann Hesthaven

In environmental acoustics and in room acoustics, many surfaces exhibit extended-reaction (ER) behavior, i.e., their surface impedance varies with the angle of the incident sound wave. This paper presents a phenomenological method for modeling such angle d ...
ELSEVIER SCI LTD2021

XBAR resonators in 128° Y-cut Lithium Niobate LiNbO3

Manal Zeddoug

The increasing demand of higher frequencies technologies in RF (Radio frequency) components, especially for telecommunication, create a need to develop wider and higher frequency bands filters, with optimal performances. Thus, constant effort are made to d ...
2021

A Study on MoS2 Nanolayer Coated Etched Fiber Bragg Grating Strain Sensor

Suneetha Sebastian

In this paper, we report on the comprehensive study on Molybdenum disulfide (MoS2) nanolayer coated etched Fiber Bragg Grating (eFBG) strain sensor. MoS2 nanolayer is coated using Physical Vapor Deposition (PVD) of Molybdenum (Mo) on eFBGs followed by sulf ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.