Publications related to Titanium

Metal-Ion Implanted Elastomers

This thesis reports on the microstructural analysis of metal ion implanted Polydimethylsiloxane (PDMS), and on the characterization and modeling of its electrical and mechanical properties. Low energy (below 35 keV) metal ion implantation into PDMS forms m ...

EPFL2010

Doping of Alkali, Alkaline-Earth, and Transition Metals in Covalent-Organic Frameworks for Enhancing CO2 Capture by First-Principles Calculations and Molecular Simulations

Berend Smit

We use the multiscale simulation approach, which combines the first-principles calculations and grand canonical Monte Carlo simulations, to comprehensively study the doping of a series of alkali (Li, Na, and K), alkaline-earth (Be, Mg, and Ca), and transit ...

2010

Phosphorescent energy relay dye for improved light harvesting response in liquid dye-sensitized solar cells

Michael Graetzel, Mohammad Khaja Nazeeruddin, Jun Ho Yum

Energy transfer from phosphorescent ruthenium complex N877 dissolved in the liquid electrolyte to the squaraine sensitizer SQ1 anchored on the titanium oxide surface resulted in a four fold increase in external quantum efficiency in the blue part of the vi ...

Royal Society of Chemistry2010

Optimized Protocol for On-Target Phosphopeptide Enrichment Prior to Matrix-Assisted Laser Desorption-Ionization Mass Spectrometry Using Mesoporous Titanium Dioxide

Ulf Anders Hagfeldt, Anna Eriksson

A novel on-target phosphopeptide enrichment method is presented that allows specific enrichment and direct anal. by matrix assisted laser desorption-ionization mass spectrometry (MALDI-MS) of phosphorylated peptides. Spots consisting of a thin film of anat ...

2010

Additive-Assisted Aqueous Synthesis of BaTiO3 Nanopowders

Paul Bowen

The effect of poly(acrylic acid) (PAA), poly(vinylpyrrolidone) (PVP), sodium dodecylsulfate (SDS), hydroxypropylmethylcellulose (HPMC), and D-fructose additives on the growth of BaTiO3 particles by aqueous synthesis is studied. Through different mechanisms ...

American Chemical Society2010

Three-dimensional harmonic holographic microcopy using nanoparticles as probes for cell imaging: erratum

Demetri Psaltis, Ye Pu, Rachel Grange, Chia-Lung Hsieh

An error was made in calculating the polarization dependent second harmonic response of barium titanate nanoparticles. We have corrected the error and repeated the comparison with the experimental results. (C) 2010 Optical Society of America ...

2010

Drift stabilization of ballooning modes in a high-$\langle \beta \rangle$ LHD configuration

Jonathan Graves, Wilfred Anthony Cooper, Lucie Brocher

Ideal MHD yields at best inconclusive predictions about the stability of the LHD heliotron for

\langle \beta \rangle \geq 3\%

. We investigate the impact of the drift stabilization of ballooning modes for the inward shifted LHD configuration (vacuum magne ...

2010

Role of Cr and Ti contents on the microstructure and mechanical properties of ODS ferritic steels

Nadine Baluc, Zbigniew Oksiuta

Six oxide dispersion strengthened (ODS) ferritic steels, with the composition of Fe-(12-14)Cr-2W-(0.1-0.3-0.5)Ti-0.3Y(2)O(3) (wt.%), have been prepared by mechanically alloying elemental powders of Fe, Cr, W, and Ti with Y2O3 nano-particles followed by hot ...

Trans Tech Publications Ltd, Laublsrutistr 24, Ch-8717 Stafa-Zurich, Switzerland2009

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Michel Rappaz, Aïcha Hessler-Wyser, Jonas Vannod

Nickel-Titanium (NiTi) shape memory alloys are often used in medical component devices, for instance as guide wires for neurological surgery applications. Manufacturing of such devices becomes more and more challenging, especially considering the need to j ...

2009

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Michel Rappaz, Aïcha Hessler-Wyser, Jonas Vannod

Nickel-Titanium (NiTi) shape memory alloys are often used in medical component devices, for instance as guide wires for neurological surgery applications. Manufacturing of such devices becomes more and more challenging, especially considering the need to j ...

2009

Titanium

Graph Chatbot

Chat with Graph Search

Metal-Ion Implanted Elastomers

Doping of Alkali, Alkaline-Earth, and Transition Metals in Covalent-Organic Frameworks for Enhancing CO2 Capture by First-Principles Calculations and Molecular Simulations

Phosphorescent energy relay dye for improved light harvesting response in liquid dye-sensitized solar cells

Optimized Protocol for On-Target Phosphopeptide Enrichment Prior to Matrix-Assisted Laser Desorption-Ionization Mass Spectrometry Using Mesoporous Titanium Dioxide

Additive-Assisted Aqueous Synthesis of BaTiO3 Nanopowders

Three-dimensional harmonic holographic microcopy using nanoparticles as probes for cell imaging: erratum

Drift stabilization of ballooning modes in a high-$\langle \beta \rangle$ LHD configuration

Role of Cr and Ti contents on the microstructure and mechanical properties of ODS ferritic steels

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Doping of Alkali, Alkaline-Earth, and Transition Metals in Covalent-Organic Frameworks for Enhancing CO2 Capture by First-Principles Calculations and Molecular Simulations

Metal-Ion Implanted Elastomers

Optimized Protocol for On-Target Phosphopeptide Enrichment Prior to Matrix-Assisted Laser Desorption-Ionization Mass Spectrometry Using Mesoporous Titanium Dioxide

Additive-Assisted Aqueous Synthesis of BaTiO3 Nanopowders

Drift stabilization of ballooning modes in a high-$\langle \beta \rangle$ LHD configuration

Role of Cr and Ti contents on the microstructure and mechanical properties of ODS ferritic steels

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Characterisation of Laser Welds, between Nitinol and Stainless Steel Wires

Phosphorescent energy relay dye for improved light harvesting response in liquid dye-sensitized solar cells

Three-dimensional harmonic holographic microcopy using nanoparticles as probes for cell imaging: erratum