OpenWrt (from open wireless router) is an open-source project for embedded operating systems based on Linux, primarily used on embedded devices to route network traffic. The main components are Linux, util-linux, musl, and BusyBox. All components have been optimized to be small enough to fit into the limited storage and memory available in home routers.
OpenWrt is configured using a command-line interface (ash shell) or a web interface (LuCI). There are about 8000 optional software packages available for installation via the opkg package management system.
OpenWrt can run on various types of devices, including CPE routers, residential gateways, smartphones, pocket computers (e.g. Ben NanoNote). It is also possible to run OpenWrt on personal computers and laptops.
The OpenWrt project was started in 2004 after Linksys had built the firmware for their WRT54G series of wireless routers with code licensed under the GNU General Public License. Under the terms of that license, Linksys was required to make the source code of its modified version available under the same license, which enabled independent developers to create derivative versions. Support was originally limited to the WRT54G series, but has since been expanded to include many other routers and devices from many different manufacturers.
Using this code as a base and later as a reference, developers created a Linux distribution that offers many features not previously found in consumer-level routers. Early on some features required proprietary software. For example, prior to OpenWrt 8.09 (based on Linux 2.6.25 and the b43 kernel module) WLAN for many Broadcom-based routers could only be had via the proprietary wl.o module (and which required Linux 2.4.x).
OpenWrt releases were historically named after cocktails, such as White Russian, Kamikaze, Backfire, Attitude Adjustment, Barrier Breaker and Chaos Calmer, and their recipes were included in the message of the day (motd) displayed after logging in using the command-line interface.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Explores the synergy between nanomaterial and CMOS electronics for (bio)sensing applications, focusing on the electromigration method for nanogap electrodes.
Operating systems based on the Linux kernel are used in embedded systems such as consumer electronics (eg. set-top boxes, smart TVs and personal video recorders (PVRs)), in-vehicle infotainment (IVI), networking equipment (such as routers, switches, wireless access points (WAPs) or wireless routers), machine control, industrial automation, navigation equipment, spacecraft flight software, and medical instruments in general.
Raspberry Pi (paɪ) is a series of small single-board computers (SBCs) developed in the United Kingdom by the Raspberry Pi Foundation in association with Broadcom. The Raspberry Pi project originally leaned toward the promotion of teaching basic computer science in schools. The original model became more popular than anticipated, selling outside its target market for uses such as robotics. It is widely used in many areas, such as for weather monitoring, because of its low cost, modularity, and open design.
An embedded operating system is an operating system for embedded computer systems. Embedded operating systems are computer systems designed to increase functionality and reliability for achieving a specific task. Depending on the method used for Computer multitasking, this type of operating system might be considered a real-time operating system (RTOS). All embedded systems contain a processor and software. There must be a place for embedded software to store the executable and temporary storage for run-time data processing.
Given the increasing ubiquity of online embedded devices, analyzing their firmware is important to security, privacy, and safety. The tight coupling between hardware and firmware and the diversity found in embedded systems makes it hard to perform dynamic ...
The LinoSPAD camera system is a modular, compact and versatile time-resolved camera system, combining a linear 256 high fill factor pixel CMOS SPAD (single-photon avalanche diode) sensor with an FPGA (field-programmable gate array) and USB 3.0 transceiver ...
While the number of IoT devices grows at an exhilarating pace their security remains stagnant. Imposing secure coding standards across all vendors is infeasible. Testing individual devices allows an analyst to evaluate their security post deployment. Any d ...