Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Quenched and self-tempered (QST) steel reinforcement bars (rebars) are manufactured by Thermex or Tempcore processes. Characterization studies of QST rebars are mostly limited to reveal the hardened outer layer and some improved mechanical properties compa ...
A physically-based two-site mean field model has been developed to describe the microstructural evolution due to recrystallization during and after deformation. The model has been applied to predict the recrystallized fraction, recrystallized grain size, a ...
Heavily cold-drawing was performed on a pearlitic steel wire and on an ultra-low carbon (ULC) steel wire in order to highlight and quantify the microstructural changes caused by this type of deformation. Both global techniques (thermoelectric power, electr ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
Chromium poisoning is a widely recognized degradation process in solid oxide fuel cells (SOFC). Stainless steel interconnect plates, in direct contact with the cathode, have been identified as the major chromium source, raising a need for electrically cond ...
In contemporary architecture there is an increasing demand for transparency and curved shape. The Cold-Bending process is an effective and relatively inexpensive way of creating double curved surface glass. This thesis focuses on the shaping of a plate wit ...
The kink behavior of non-slender glass fiber-reinforced epoxy prismatic specimens of variable length and fiber volume fraction at temperatures ranging from 25 degrees C to 125 degrees C was investigated. Splitting failure occurred at the glassy state while ...
In this paper, investigation of the softening behaviour of a supersaturated Al-Mn-Fe-Si alloy during annealing after cold rolling has been carried out. Two different homogenization conditions were considered, of which one gives a condition of a large amoun ...
The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys with different initial amounts of Mn (0.4 and 1.0. wt%) is studied. In addition to their as-cast conditions, the supersaturated Al-Mn-Fe-Si alloys were appropr ...
This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grai ...
