A collimator sight is a type of optical sight that allows the user looking into it to see an illuminated aiming point aligned with the device the sight is attached to, regardless of eye position (with little parallax). They are also referred to as collimating sights or "occluded eye gunsight" (OEG).
The basic layout of a collimator sight is a closed tube with a lens at its open end and a luminous reticle mounted near the closed end at the focus of the lens, creating an optical collimator. The reticle is illuminated by an electronic light source (an incandescent light bulb or, more recently, a light-emitting diode) or by ambient light gathered behind the reticle via an opalescent window or fiber optic light pipe. Collimator sights are a relatively old idea, being used in many forms for almost 100 years.
These sights are 'blind' sights; that is, they are used with both eyes open while one looks into the sight, with one eye open and moving the head to alternately see the sight and then at the target, or using one eye to partially see the sight and target at the same time.
Collimator sights as weapon sights are considered to be very simple, rugged and low cost devices. They have been used on mortars and field guns since World War I. There have had more modern incarnations such as the Armson Occluded Eye Gunsight (OEG) and the Normark Corp. Singlepoint. These both used a light gathering rod in a protective clear dome collecting ambient light to illuminate a 'dot' style reticle.
Collimator sights have had uses as a small arms sight for low light situations (such as twilight or "room clearing" operations) since there is no intervening optical window that can block the light, allowing the use of both eyes with a relatively un-obstructed field of view. In recent years the introduction of illuminated reflex sights, holographic sights, and even telescopic sights; (for example the Advanced Combat Optical Gunsight (ACOG) using the "Bindon Aiming Concept") have replaced dedicated collimator sights since these other types of sights can be used with both eyes in the role of a collimator sight.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A reflector sight or reflex sight is an optical sight that allows the user to look through a partially reflecting glass element and see an illuminated projection of an aiming point or some other image superimposed on the field of view. These sights work on the simple optical principle that anything at the focus of a lens or curved mirror (such as an illuminated reticle) will appear to be sitting in front of the viewer at infinity.
A collimator is a device which narrows a beam of particles or waves. To narrow can mean either to cause the directions of motion to become more aligned in a specific direction (i.e., make collimated light or parallel rays), or to cause the spatial cross section of the beam to become smaller (beam limiting device). The English physicist Henry Kater was the inventor of the floating collimator, which rendered a great service to practical astronomy. He reported about his invention in January 1825.
A reticle, or reticule also known as a graticule, is a pattern of fine lines or markings built into the eyepiece of an optical device such as a telescopic sight, spotting scope, theodolite, optical microscope or the screen of an oscilloscope, to provide measurement references during visual inspections. Today, engraved lines or embedded fibers may be replaced by a superimposed on a screen or eyepiece.
At CERN's Large Hadron Collider (LHC), proton and heavy-ion beams are accelerated to multi-TeV energies to be collided for the needs of the scientific community around the world. The total stored beam energy of tens to hundreds ofMJ creates potential threa ...
Optimal shading control can improve occupants’ visual comfort and increase energy savings on artificial lighting and cooling loads during warm seasons. A highly integrated automated shading system is presented in this paper. Designed to regulate daylightin ...
2019
,
For high-impact devices, subsequent vibrations have as much influence on the deterioration of the mechanical structure as the impact itself. To mitigate the consequences of both impacts and resulting vibrations, it is crucial to accurately understand the p ...