Concept

Gas metal arc welding

Related publications (141)

Experimental Investigation of Instability-Free Welded Moment Connections With Simplified Weld Details

Dimitrios Lignos, Andronikos Skiadopoulos

In capacity designed steel moment resisting frames, inelastic deformations are mostly concentrated in the steel beams and the column fixed ends of the first story. This design concept limits the participation of the column web’s panel zone in the energy di ...

2023

Hysteretic behaviour of welded connections with highly inelastic panel zones

Dimitrios Lignos, Andronikos Skiadopoulos

The current practice in capacity-designed steel moment resisting frames (MRFs) worldwide allows for limitedshear yielding in the column web panel zone. As such, inelastic deformations concentrate near the beam ends, thereby leading to flexural stre ...

Ernst & Sohn2023

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Yandong Jing, Ke Huang

Wire-arc directed energy deposition (wire-arc DED), recognized for its ability to produce large-scale parts, has gained considerable attention. However, a critical issue with this method is the high prevalence of internal porosity defects found in the manu ...

Lausanne2023

Local electrochemical and thermal investigation of a segmented reversible solid oxide fuel cell and electrolyzer

Jan Van Herle, Stefan Diethelm, Zacharie Wuillemin, Audrey Désirée Wesoly, Hamza Moussaoui

A novel setup has been designed and mounted to investigate the local electrochemical and thermal behavior of a cell from a 4-cell short stack under reversible operation solid oxide fuel cell/solid oxide electrolyzer (SOFC/SOE). It consists in the partition ...

Oxford2023

Revealing cation and metal gradients in and underneath passive films of the stainless steel 1.4652 in acidic and alkaline electrolytes with angular resolved dual energy X-ray photo-electron spectroscopy

Stefano Mischler, Patrik Schmutz, Anna Neus Igual Muñoz, Roland Hauert

Passive films on the superaustenitic stainless steel 1.4652 were studied using angular resolved hard X-ray photo-electron spectroscopy (HAXPES), which provides an increased information depth compared to conventional X-ray photo-electron spectroscopy (XPS). ...

Hoboken2023

Divertor detachment and reattachment with mixed impurity seeding on ASDEX Upgrade

Using newly developed spectroscopic models to measure the divertor concentration of Ne and Ar, it is shown that the experimental detachment threshold on ASDEX Upgrade with Ar-only and mixtures of Ar+N or Ne+N scales as expected in comparison with an analyt ...

IOP Publishing Ltd2023

Full-scale testing of European steel beams with reduced beam section under reversed cyclic loading

Dimitrios Lignos, Hiroyuki Inamasu

Steel beams with reduced beam section (RBS) are often used as part of prequalified connections in seismic regions. However, RBS connections are not as common in Europe. Reasons relate to easiness in fabrication, which requires on-site welding, and the seis ...

Springer Nature2022

Experimental Investigation of the Inelastic Cyclic Behavior of Concrete-Filled Double-Skin Tubular Beam-Columns with Corrugated Inner Skins and Ultrahigh-Strength Corner Tubes

Dimitrios Lignos, Mojtaba Farahi

This paper presents the experimental results from nine full-scale concrete-filled double-skin tubular (CFDST) beam-columns. The test specimens exploited two fabrication strategies, featuring either hollow steel inner skins with corrugated geometry or ultra ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Realistic Modelling of Dynamics at Nanostructured Interfaces Relevant to Heterogeneous Catalysis

Kevin Rossi

The focus of this short review is directed towards investigations of the dynamics of nanostructured metallic heterogeneous catalysts and the evolution of interfaces during reaction-namely, the metal-gas, metal-liquid, and metal-support interfaces. Indeed, ...

MDPI2022

Welded moment connections with highly dissipative panel zones for enhanced seismic performance of steel moment frames

Andronikos Skiadopoulos

Research conducted after the 1994 Northridge earthquake in the U.S. and the 1995 Kobe earthquake in Japan led to the development of today's pre-qualified beam-to-column connections for capacity-designed steel moment resisting frames (MRFs). Welded moment c ...

EPFL2022

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.