Concept
Load–store architecture
In computer engineering, a load–store architecture (or a register–register architecture) is an instruction set architecture that divides instructions into two categories: memory access (load and store between memory and registers) and ALU operations (which only occur between registers). Some RISC architectures such as PowerPC, SPARC, RISC-V, ARM, and MIPS are load–store architectures. For instance, in a load–store approach both operands and destination for an ADD operation must be in registers. This differs from a register–memory architecture (for example, a CISC instruction set architecture such as x86) in which one of the operands for the ADD operation may be in memory, while the other is in a register. The earliest example of a load–store architecture was the CDC 6600. Almost all vector processors (including many GPUs) use the load–store approach.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (1)
EE-583: Spacecraft avionics architectures
The course presents and analyses the different systems, architectures and components of spacecraft avionics (on board data handling and processing systems) controlling and commanding spacecraft and pa
Related lectures (18)
Introduction to CAN & CANopen
Covers the introduction to Controller Area Network (CAN) and CANopen protocols used in spacecraft avionics systems, including network standards, future trends, and communication objects.
Telecommand System Requirements
Covers the requirements and functions of a telecommand system in spacecraft, including uploading programs and controlling spacecraft operations.
On-Board Computers: Microprocessors and Microcontrollers
Covers spacecraft avionics systems, architectures, and processors, focusing on on-board computers and microprocessors.
Related publications (9)
Software Support for Non-Volatile Memory (NVM) Programming
Non-Volatile Memory (NVM) is an emerging type of memory device that provides fast, byte-addressable, and high-capacity durable storage. NVM sits on the memory bus and allows durable data structures designs similar to the in-memory equivalent ones. Expensiv ...
EPFL2021Linebacker: Preserving Victim Cache Lines in Idle Register Files of GPUs
Modern GPUs suffer from cache contention due to the limited cache size that is shared across tens of concurrently running warps. To increase the per-warp cache size prior techniques proposed warp throttling which limits the number of active warps. Warp thr ...
ASSOC COMPUTING MACHINERY2019Optimized Memory Access For Dynamically Scheduled High Level Synthesis
Paolo Ienne, Atri Bhattacharyya
Dynamically-scheduled elastic circuits generated by High-Level Synthesis (HLS) tools are inherently out-of-order, following the flow of data rather than the evolution of an instruction pointer. Components of the circuit which access memory need to be conne ...
2018Related concepts (9)
Vector processor
In computing, a vector processor or array processor is a central processing unit (CPU) that implements an instruction set where its instructions are designed to operate efficiently and effectively on large one-dimensional arrays of data called vectors. This is in contrast to scalar processors, whose instructions operate on single data items only, and in contrast to some of those same scalar processors having additional single instruction, multiple data (SIMD) or SWAR Arithmetic Units.
Processor register
A processor register is a quickly accessible location available to a computer's processor. Registers usually consist of a small amount of fast storage, although some registers have specific hardware functions, and may be read-only or write-only. In computer architecture, registers are typically addressed by mechanisms other than main memory, but may in some cases be assigned a memory address e.g. DEC PDP-10, ICT 1900.
Reduced instruction set computer
In computer engineering, a reduced instruction set computer (RISC) is a computer architecture designed to simplify the individual instructions given to the computer to accomplish tasks. Compared to the instructions given to a complex instruction set computer (CISC), a RISC computer might require more instructions (more code) in order to accomplish a task because the individual instructions are written in simpler code.