Hardness | EPFL Graph Search

In materials science, hardness (antonym: softness) is a measure of the resistance to localized plastic deformation induced by either mechanical indentation or abrasion. In general, different materials differ in their hardness; for example hard metals such as titanium and beryllium are harder than soft metals such as sodium and metallic tin, or wood and common plastics. Macroscopic hardness is generally characterized by strong intermolecular bonds, but the behavior of solid materials under force is complex; therefore, hardness can be measured in different ways, such as scratch hardness, indentation hardness, and rebound hardness. Hardness is dependent on ductility, elastic stiffness, plasticity, strain, strength, toughness, viscoelasticity, and viscosity. Common examples of hard matter are ceramics, concrete, certain metals, and superhard materials, which can be contrasted with soft matter. Measuring hardness There are three main types of hardness measurements: scratch, in

Embrittlement induced by the synergistic effects of radiation damage and helium in structural steels

Kun Wang

Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, embrittlement resulting from the combined effects of radiation induced displacement damage (measured in dpa = displacement per atom) and transmutation products, especially helium gas, is one of the key issues. Four different steels were selected for mechanical and microstructural studies to understand the mechanisms of embrittlement induced by the combined effects of displacement damage and helium after irradiation in SINQ, the Swiss spallation source. The irradiations conditions were in the range: 10.7 ¿ 20.4 dpa with 850-1750 appm He at 160-300 °C. The evolution of the mechanical properties after irradiation was investigated by tensile and hardness tests. Radiation-induced defect clusters and helium bubbles were quantified by transmission electron microscopy (TEM). Emphasis was put on the deformation mechanisms under the different observed fracture mode, (ductile, quasi-cleavage and intergranular), whose occurrence depends on the irradiation conditions (dpa, He content and irradiation temperature). The tensile stress-strain curves and the scanning electron microscopy images of fracture surfaces showed distinct fracture mechanisms under different irradiation and test conditions. The tensile tests showed a yielding stress increase and loss of ductility of irradiated specimens. Hardness was measured on the specimens before tensile testing. The hardness results demonstrated an increasing trend with irradiation dose and helium content. TEM observations were done for all irradiated fractured specimens. Small defect clusters were observed in the 12.3 dpa specimen, but large defect clusters with loop-shape were very few. In the specimens of 17.2, 17.7 and 20.4 dpa, many large dislocation loops were detected besides small clusters. In addition, helium bubbles were observed in all specimens. The average size of defect clusters increased from 4.2 nm to 11.8 nm with dose increasing from 12.3 dpa to 20.4 dpa, whereas the number density did not change significantly. Meanwhile, the average size of visible helium bubbles increased from 1.03 nm to 1.93 nm. The microstructures in deformed area of irradiated specimens were observed and defect free channels with {110} and {112} slip planes were found in some specimens, indicating plastic flow localization. The average width of the channels is about 100 nm. Regarding the brittle samples, the TEM-lamella were extracted directly below intergranular fracture surfaces or cleavage surfaces by focused ion beam. Strikingly, deformation twinning was observed as the main feature in three irradiated specimens at high dose. Only twins with {112} planes were observed in all of these samples. The average thickness of twins is about 34 nm. Twins started from a fracture surface became gradually thinner with distance away from the fracture surface and stopped in the matrix finally. Features such as twin-precipitates interaction, twin-grain boundary and/or lath boundary interaction were observed. Twinning bands were seen to be arrested by grain boundaries or large precipitates, but could penetrate martensitic lath boundaries. Unlike the case of defect free channels, inside twins small defect-clusters, dislocation loops and dense small helium bubbles were observed.

EPFL2015

Évolution microstructurale et propriétés mécaniques d'un alliage Co-Ni-Cr

Raffaele Cosimati

This study concerns the evolution of the thermomechanical properties of new high-performance materials. In particular, we focus on the relationship between the microstructure and the mechanical properties of a superalloy based on Co-Ni-Cr. Superalloys are metallic alloys with superior characteristics to conventional alloys, especially in extreme conditions, and find application in all that areas requiring materials with high elastic modulus, yield strength and resistance. The investigated alloy is used with satisfaction since several years, but the origin of its outstanding mechanical properties is still poorly understood, as well as the role of small alloying elements additions on mechanical properties. To understand the influence, on the mechanical properties, of the elements added to the base composition, the study is carried out simultaneously on two variants of the material, differing for the presence of a small amount of beryllium in one them. The variant containing beryllium exhibits superior mechanical properties with respect to the base variant. The microstructural evolution and mechanical properties was monitored by using several complementary techniques. Series of heat treatments were performed on samples from the two variants, and both TEP and hardness were systematically measured. This has allowed us to establish the different stages of microstructural changes with the temperature. The TEP is a parameter very sensitive to the change in matrix's composition. It indicates that exposure of this material to a temperature between 500°C and 600°C produces a precipitation stage (A), involving titanium. Such a precipitation is responsible for a remarkable hardening, as well as an increase in the elastic limit. Mechanical spectroscopy allows us to obtain information about the mobility of structural defects which dissipate energy when undergone to a periodic stress. By developing a phenomenological model based on the ADIF curves, we can affirm that the hardening comes from the pinning of dislocations by A precipitates. A second precipitation stage (B) occurs only on the variant containing beryllium, undergone a complex sequence of heat treatments up to 700°C. The analysis of samples by TEM and APT provided essential support to the interpretation of results, and to characterization of the precipitation B. Precipitates B are nanostructured intermetallic compounds NiBe, analogous to GP zones. Their growth is favored by the segregation of titanium at the precipitate-matrix interface to relieve the coherency strains. The hardening provided by B precipitates, together with the structural hardening due to the cold working and the precipitation hardening due to the heating at 550°C, allows to obtain the maximum hardness values. The peaks on the internal friction spectra, also provide informations about the influence of beryllium on the mobility of grain boundaries. This parameter determines the recrystallization and the relaxation mechanism at high temperature, which can be observed by mechanical spectroscopy. Finally, the work here presented yields an important contribution to the understanding of the performance's origin of a Co-Ni-Cr superalloy. It also points the way for other studies aiming the optimization of production processes, in terms of temperature and time of annealing, to obtain the desired properties. This thesis allowed to discover a new hardening phase (B) previously unknown, which could lead to even higher hardness values.

EPFL2016

Alloy development of a new platinum-based bulk metallic glass

Hamed Kazemi

The aim of the present thesis is the development of a new Pt-based bulk metallic glass based on the ternary system of Pt-B-Si that i) complies with the hallmarking standard Pt 850 (i.e. with at least 85 wt.-pct of Pt); ii) provides high hardness (HV>600) and iii) has a critical casting diameter larger than 5 mm. To this end, the low melting point areas in the Pt-B-Si ternary system have first been established. Then, the partial substitution of Pt by various transition metals (TM) as well as partial substitution of Si by Ge and its concomitant effect on the characteristic temperatures of the metallic glass, i.e. the temperature of glass transition, Tg, the temperature of crystallization, Tx, as well as the solidus, Ts, and liquidus temperature, Tl, have been assessed. Particular attention was given to the evolution of the temperature difference ÎT=Tx-Tg that characterizes the formability of the alloy in its supercooled liquid region.

EPFL2017