Geodesics on an ellipsoid

Summary

The study of geodesics on an ellipsoid arose in connection with geodesy specifically with the solution of triangulation networks. The figure of the Earth is well approximated by an oblate ellipsoid, a slightly flattened sphere. A geodesic is the shortest path between two points on a curved surface, analogous to a straight line on a plane surface. The solution of a triangulation network on an ellipsoid is therefore a set of exercises in spheroidal trigonometry . If the Earth is treated as a sphere, the geodesics are great circles (all of which are closed) and the problems reduce to ones in spherical trigonometry. However, showed that the effect of the rotation of the Earth results in its resembling a slightly oblate ellipsoid: in this case, the equator and the meridians are the only simple closed geodesics. Furthermore, the shortest path between two points on the equator does not necessarily run along the equator. Finally, if the ellipsoid is further perturbed to become a triaxial ellipsoid (with three distinct semi-axes), only three geodesics are closed. There are several ways of defining geodesics . A simple definition is as the shortest path between two points on a surface. However, it is frequently more useful to define them as paths with zero geodesic curvature—i.e., the analogue of straight lines on a curved surface. This definition encompasses geodesics traveling so far across the ellipsoid's surface that they start to return toward the starting point, so that other routes are more direct, and includes paths that intersect or re-trace themselves. Short enough segments of a geodesics are still the shortest route between their endpoints, but geodesics are not necessarily globally minimal (i.e. shortest among all possible paths). Every globally-shortest path is a geodesic, but not vice versa. By the end of the 18th century, an ellipsoid of revolution (the term spheroid is also used) was a well-accepted approximation to the figure of the Earth.

Official source

https://en.wikipedia.org/wiki/Geodesics_on_an_ellipsoid

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (3)

Quasiconformal Embeddings of Y-Pieces

Robert Silhol

In this paper we construct quasiconformal embeddings from Y-pieces that contain a short boundary geodesic into degenerate ones. These results are used in a companion paper to study the Jacobian tori of Riemann surfaces that contain small simple closed geodesics.

Springer Heidelberg2014

Capacities, Systoles and Jacobians of Riemann Surfaces

Björn Mützel

To any compact Riemann surface of genus g one may assign a principally polarized abelian variety (PPAV) of dimension g, the Jacobian of the Riemann surface. The Jacobian is a complex torus and we call a Gram matrix of the lattice of a Jacobian a period Gram matrix. The aim of this thesis is to contribute to the Schottky problem, which is to discern the Jacobians among the PPAVs. Buser and Sarnak approached this problem by means of a geometric invariant, the first successive minimum. They showed that the square of the first successive minimum, the squared norm of the shortest non-zero vector, in the lattice of a Jacobian of a Riemann surface of genus g is bounded from above by log(4g), whereas it can be of order g for the lattice of a PPAV of dimension g. The main goal of this work was to improve this result and to get insight into the connection between the geometry of a compact Riemann surface that is given in hyperbolic geometric terms, and the geometry of its Jacobian. We show the following general findings: For a hyperelliptic surface the first successive minimum is bounded from above by a universal constant. The square of the second successive minimum of the Jacobian of a Riemann surface of genus g is equally of order log(g). We provide refined upper bounds on the consecutive successive minima if the surface contains several disjoint small simple closed geodesics and a lower bound for the norm of certain lattice vectors of the Jacobian, if the surface contains small non-separating simple closed geodesics. If the concrete geometry of the Riemann surface is known, more precise statements can be made. In this case we obtain theoretical and practical estimates on all entries of the period Gram matrix. Here we establish upper and lower bounds based on the geometry of the cut locus of simple closed geodesics and also on the geometry of Q-pieces. In addition the following two results have been obtained: First, an improved lower bound for the maximum value of the norm of the shortest non-zero lattice vector among all PPAVs in even dimensions. This follows from an averaging method from the geometry of numbers applied to a family of symmetric PPAVs. Second, a new proof for a lower bound on the number of homotopically distinct geodesic loops, whose length is smaller than a fixed constant. This lower bound applies not only to geodesic loops on Riemann surfaces, but on arbitrary manifolds of non-positive curvature.

EPFL2011

Trace coordinates of Teichmüller spaces of Riemann surfaces

Thomas Gauglhofer

Using an algebraic formalism based on matrices in SL(2,R), we explicitly give the Teichmüller spaces of Riemann surfaces of signature (0,4) (X pieces), (1,2) ("Fish" pieces) and (2,0) in trace coordinates. The approach, based upon gluing together two building blocks (Q and Y pieces), is then extended to tree-like pants decomposition for higher signatures (g,n) and limit cases such as surfaces with cusps or cone-like singularities. Given the Teichmüller spaces, we establish a set of generators of their modular groups for signatures (0,4), (1,2) and (2,0) in trace coordinates using transformations acting separately on the building blocks and an algorithm on dividing geodesics. The fact that these generators act particularly nice in trace coordinates gives further motivation to this choice (rather then the one of Fenchel-Nielsen coordinates). This allows us to solve the Riemann moduli problem for X pieces, "Fish" pieces and surfaces of genus 2; i.e. to give the moduli spaces as the fundamental domains for the action of the modular groups on the Teichmüller spaces. In this context, we also give an algorithm deciding whether two Riemann surfaces of signatures (0,4), (1,2) or (2,0) given by points in the Teichmüller space are isometric or not. As a consequence, we show the following two results concerning simple closed geodesics: On any purely hyperbolic Riemann surface (containing neither cusps nor cone-like singularities), the longest of two simple closed geodesics that intersect one another n times is of length at least ln, a sharp constant independent of the surface. We explicitly give ln for n = 1,2,3 and study its behaviour when n goes to infinity. X pieces are spectrally rigid with respect to the length spectrum of simple closed geodesics.

EPFL2006

Related concepts (27)

In navigation, a rhumb line, rhumb (rʌm), or loxodrome is an arc crossing all meridians of longitude at the same angle, that is, a path with constant bearing as measured relative to true north. The effect of following a rhumb line course on the surface of a globe was first discussed by the Portuguese mathematician Pedro Nunes in 1537, in his Treatise in Defense of the Marine Chart, with further mathematical development by Thomas Harriot in the 1590s.

Great-circle navigation or orthodromic navigation (related to orthodromic course; ) is the practice of navigating a vessel (a ship or aircraft) along a great circle. Such routes yield the shortest distance between two points on the globe. The great circle path may be found using spherical trigonometry; this is the spherical version of the inverse geodetic problem. If a navigator begins at P1 = (φ1,λ1) and plans to travel the great circle to a point at point P2 = (φ2,λ2) (see Fig.

Related courses (13)

MATH-126: Geometry for architects II

Ce cours traite des 3 sujets suivants : la perspective, la géométrie descriptive, et une initiation à la géométrie projective.

MATH-476: Optimal transport

The first part is devoted to Monge and Kantorovitch problems, discussing the existence and the properties of the optimal plan. The second part introduces the Wasserstein distance on measures and devel

CS-450: Algorithms II

A first graduate course in algorithms, this course assumes minimal background, but moves rapidly. The objective is to learn the main techniques of algorithm analysis and design, while building a reper

Related lectures (132)

Capacities, Systoles and Jacobians of Riemann Surfaces

Björn Mützel

EPFL2011