Concept

Solid-propellant rocket

Summary

A solid-propellant rocket or solid rocket is a rocket with a rocket engine that uses solid propellants (fuel/oxidizer). The earliest rockets were solid-fuel rockets powered by gunpowder; they were used in warfare by the Chinese, Indians, Mongols and Persians as early as the 13th century. All rockets used some form of solid or powdered propellant up until the 20th century, when liquid-propellant rockets offered more efficient and controllable alternatives. Solid rockets are still used today in military armaments worldwide, model rockets, solid rocket boosters and on larger applications for their simplicity and reliability. Since solid-fuel rockets can remain in storage for an extended period without much propellant degradation and because they almost always launch reliably, they have been frequently used in military applications such as missiles. The lower performance of solid propellants (as compared to liquids) does not favor their use as primary propulsion in modern medium-to-large launch vehicles customarily used to orbit commercial satellites and launch major space probes. Solids are, however, frequently used as strap-on boosters to increase payload capacity or as spin-stabilized add-on upper stages when higher-than-normal velocities are required. Solid rockets are used as light launch vehicles for low Earth orbit (LEO) payloads under 2 tons or escape payloads up to . A simple solid rocket motor consists of a casing, nozzle, grain (propellant charge), and igniter. The solid grain mass burns in a predictable fashion to produce exhaust gases, the flow of which is described by Taylor–Culick flow. The nozzle dimensions are calculated to maintain a design chamber pressure, while producing thrust from the exhaust gases. Once ignited, a simple solid rocket motor cannot be shut off, because it contains all the ingredients necessary for combustion within the chamber in which they are burned. More advanced solid rocket motors can be throttled, and also be extinguished, and then re-ignited by control of the nozzle geometry, or through the use of vent ports.

Official source

https://en.wikipedia.org/wiki/Solid-propellant_rocket

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Solid-propellant rocket

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Deep learning-based solid component measuring enabled interpretable prediction of tumor invasiveness for lung adenocarcinoma

Modeling of solids particle diversion to promote uniform growth of multiple hydraulic fractures

Modeling of solids particle diversion to promote uniform growth of multiple hydraulic fractures

Deep learning-based solid component measuring enabled interpretable prediction of tumor invasiveness for lung adenocarcinoma

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma