Slow light | EPFL Graph Search

Slow light is the propagation of an optical pulse or other modulation of an optical carrier at a very low group velocity. Slow light occurs when a propagating pulse is substantially slowed by the interaction with the medium in which the propagation takes place. Group velocities below c were known to be possible as far back as 1880, but could not be realized in a useful manner until 1991, when Stephen Harris and collaborators demonstrated electromagnetically induced transparency in trapped strontium atoms. Reduction of the speed of light by a factor of 165 was reported in 1995. In 1998, Danish physicist Lene Vestergaard Hau led a combined team from Harvard University and the Rowland Institute for Science which realized much lower group velocities of light. They succeeded in slowing a beam of light to about 17 meters per second. In 2004, researchers at UC Berkeley first demonstrated slow light in a semiconductor, with a group velocity 9.6 kilometers per second. Hau and her colleague

Light Confinement and Nonlinear Light-Matter Interaction in Semiconductor Photonic Crystal Cavities

Mohamed Sabry Abdel-Aliem Mohamed

The ability to control and manipulate light is a fundamental aspect that is at the very core of the development of integrated photonic circuits. It is desirable to achieve such control down to a scale that is comparable to or smaller than the wavelength of light, to enable highly efficient interaction with matter, which can eventually go down to single photon levels. Photonic crystals are particularly appealing in that respect, by providing optical bandgaps and facilitating dispersion shaping, through the precise patterning of layers. This is to be accomplished ideally in compact designs that are well-suited for fabrication with current technology and by utilizing material that has the capacity for integration. By exploiting existing light-matter interaction mechanisms, the available toolset for component design can be expanded, allowing to build optical chips with a wide range of functionality. In the current work, a platform for integrated III-nitride photonic components on silicon is designed and implemented. A refined fabrication process for III-nitride micro- and nanostructures is developed, leading to the realization of suspended optical devices with both high performance and structural stability. Thorough optical and material characterization of the semiconductor layers is conducted to identify potential limitations, particularly with epitaxial GaN on Si technology, with respect to current crystal growth techniques. AlN layers based on a sputter-deposition process are proposed as an alternative for passive optical devices. Two-dimensional photonic crystals are designed in gallium nitride and aluminum nitride, targeting operational wavelengths in the near-infrared telecom range. Optimized photonic crystal cavities are considered for maximizing light confinement in the semiconductor layers. By utilizing resonance enhancement, second and third harmonic generation are demonstrated in gallium nitride photonic crystal cavities featuring record-high quality factor values. This is achieved through a far-field coupling approach under low-power continuous-wave operation. High conversion efficiencies are attained in gallium nitride, exceeding previous demonstrations in the material. Propagation of the harmonic signals in the semiconductor layer is analyzed using finite-element time-domain modeling for the feasibility of an extraction mechanism. Moreover, slow light coupled cavity waveguides are developed in a silicon platform, relying on optimized cavity designs that feature wideband operation in the near-infrared telecom range. A record-high value for group-index bandwidth product is achieved in the devices through improved design implementation. An end-fire based Fourier-space imaging technique is applied for the characterization of the optical structures, through which spatially-selective reconstruction of dispersion maps enabled accurate extraction of slow light properties. The influence of finite-size effects on slow light behavior is elucidated by implementing extended cavity chains. Furthermore, light transport regimes across the dispersion band are identified including the transition towards diffusive light transport and subsequent localization. The performance of coupled-cavity waveguides in the presence of disorder is quantified, revealing constraints on slow light transport, considering state-of-the-art fabrication.

EPFL2018

Optical Gas-Phase Frequency References Based on Photonic Crystal Technology

Isabelle Dicaire

Optical frequency references are devices providing well-defined and stable optical frequency responses to incoming radiation for applications such as high-precision spectroscopy and optical fibre communications. To stabilise the emission frequency of lasers, which drifts with time mostly because of fluctuations in temperature and mechanical vibrations, atomic and molecular optical transitions can be used since they show precise and well-defined frequency responses to incoming radiation. However from a practical standpoint conventional gas cell devices cannot be easily integrated into existing optical systems because of their bulky dimensions. To replace conventional absorption cells, photonic crystal fibres filled with gas-phase material are promising devices owing to their robustness, reliability, and portable characteristics. In addition they can be directly embedded into existing optical systems and they perform well in harsh environments. In this experimental study, optical gas-phase frequency references based on photonic crystal technology are realised. The gas-sensing properties of different photonic crystal fibre samples are studied and the long-term stability and reliability of fibre gas cells are demonstrated. In addition an analytical model predicting the gas-filling time in photonic crystal fibres (PCF) is developed and can be applied to any type of fibre, fibre geometry, or length. Then fibre gas cells filled with acetylene gas, a recognised frequency reference gas-phase material, have been prepared to conduct fundamental research on slow & fast light generation in optical fibres to verify the possibilities of slow light in enhancing light-matter interaction. The group velocity of light is controlled by modifying the material and structural dispersive properties of the PCF absorption cells through stimulated Brillouin scattering and cavity ring resonators, respectively. We could demonstrate that material slow light has no impact on the molecular absorption effect whereas structural slow light has an impact on the absorption efficiency scaling linearly with the group index. Such radically different responses to slow light suggest that group velocity is not the universal physical quantity scaling light-matter interaction, and that the optical absorption of molecules is more closely related to the velocity of the electromagnetic energy. Finally the impact of slow light on the molecular absorption efficiency is also evaluated in dispersion-engineered photonic crystal waveguides. We demonstrate that in planar photonic crystal waveguides the field enhancement and its evanescent fraction have more impact on the absorption efficiency than the reduction of the group velocity of light.

EPFL2012

Optical parametric gain in CMOS-compatible sub-100 mu m photonic crystal waveguides

Ezgi Sahin

Emerging compositionally engineered complementary metal-oxide-semiconductor (CMOS)-compatible platforms have been employed for high efficiencies in various on-chip applications, including optical parametric amplification and wavelength conversion. Combining the novel nonlinear optics platforms such as ultra-silicon-rich nitride (USRN: Si7N3) with periodic waveguide structures can lead to further enhancement of material nonlinearities via the slow light effect and enable ultra-compact devices. Four-wave mixing in a USRN-based, CMOS-compatible, photonic crystal waveguide (PhCWg) leading to on/off optical parametric signal gain reaching 3 dB, and a large instantaneous idler conversion efficiency of -1 dB is explored experimentally. Enhancement of Kerr nonlinearity in the presence of a sizable and near-constant group index allows the findings on an ultra-compact, 97 mu m-long PhCWg, equivalent to a large on/off gain per unit length of 333 dB/cm. (C) 2020 Author(s).

AMER INST PHYSICS2020