Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This study proposes a new advanced algorithm for determining material parameters based on in situ tests. In situ testing gives an opportunity to perform soil characterization in natural stress conditions on a representative soil mass. Most field techniques ...
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...
There is currently a lack of established calculation method for the geotechnical design of heat exchanger piles, although the technology is experiencing a fast expansion. Instead of quantifying the effects of temperature changes on the static behavior of h ...
This paper presents the results of an experimental study related to the thermal effects on kaolin clay cyclic mobility. The thermal effects were identified by comparing the experimental results of cyclic triaxial tests performed at high temperature (90 C) ...
Quasi-static axial tension experiments were performed in a laboratory environment on epoxy bonded, balanced double-lap joints composed of pultruded GFRP flat profiles. The parameters investigated were the overlap length (from 50 to 100 mm), the adhesive la ...
[ 1] This study develops a framework for modeling deformation of individual pores in elastoviscoplastic earth material accounting for the effects of evolving pore size and shape on material hydraulic permeability. We describe the velocity field of a fluid ...
Quasi-static axial tension experiments were performed in a laboratory environment on epoxy bonded, balanced double-lap and single-lap joints from pultruded GFRP flat sections. Full-scale specimens were used to avoid size effects. Parameters investigated we ...
This study presents a numerical approach designed for material parameter identification for the coupled hydro-mechanical boundary value problem (BVP) of the piezocone test (CPTU) in normally and lightly overconsolidated clayey soils. The study is presented ...
In coastal marshes, low-permeability mud is often found overlying high permeability sandy deposits. A recently developed 3D creek-marsh model was used to investigate the effects of soil stratigraphy (a mud layer overlying a sandy-loam layer) on pore-water ...
