An extended boot record (EBR), or extended partition boot record (EPBR), is a descriptor for a logical partition under the common DOS disk drive partitioning system. In that system, when one (and only one) partition record entry in the master boot record (MBR) is designated an extended partition, then that partition can be subdivided into a number of logical partitions. The actual structure of that extended partition is described by one or more EBRs, which are located inside the extended partition. The first (and sometimes only) EBR will always be located on the very first sector of the extended partition.
Unlike primary partitions, which are all described by a single partition table within the MBR, and thus limited in number, each EBR precedes the logical partition it describes. If another logical partition follows, then the first EBR will contain an entry pointing to the next EBR; thus, multiple EBRs form a linked list. This means the number of logical drives that can be formed within an extended partition is limited only by the amount of available disk space in the given extended partition.
While in Windows versions up to XP logical partitions within the extended partition were aligned following conventions called "drive geometry" or "CHS", since Windows Vista they are aligned to a 1-MiB boundary. Due to this difference in alignment, the Logical Disk Manager of XP (Disk Management) may delete these extended partitions without warning.
EBRs have essentially the same structure as the MBR; except only the first two entries of the partition table are supposed to be used, besides having the mandatory boot record signature (or magic number) of at the end of the sector. This 2-byte signature appears in a disk editor as first and last, because IBM-compatible PCs store hexadecimal words in little-endian order (see table below).
The IBM Boot Manager (included with OS/2 operating systems and some early versions of Partition Magic), adds at least one 9-byte entry (starting at offset ) to each EBR sector.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A master boot record (MBR) is a special type of boot sector at the very beginning of partitioned computer mass storage devices like fixed disks or removable drives intended for use with IBM PC-compatible systems and beyond. The concept of MBRs was publicly introduced in 1983 with PC DOS 2.0. The MBR holds the information on how the disc's sectors (aka “blocks”) are divided into partitions, each partition notionally containing a file system.
A volume boot record (VBR) (also known as a volume boot sector, a partition boot record or a partition boot sector) is a type of boot sector introduced by the IBM Personal Computer. It may be found on a partitioned data storage device, such as a hard disk, or an unpartitioned device, such as a floppy disk, and contains machine code for bootstrapping programs (usually, but not necessarily, operating systems) stored in other parts of the device. On non-partitioned storage devices, it is the first sector of the device.
exFAT (Extensible File Allocation Table) is a introduced by Microsoft in 2006 and optimized for flash memory such as USB flash drives and SD cards. exFAT was proprietary until 28 August 2019, when Microsoft published its specification. Microsoft owns patents on several elements of its design. exFAT can be used where NTFS is not a feasible solution (due to data-structure overhead), but where a greater than that of the standard FAT32 file system (i.e. 4 GB) is required.
This thesis is devoted to information-theoretic aspects of community detection. The importance of community detection is due to the massive amount of scientific data today that describes relationships between items from a network, e.g., a social network. I ...
Covers free meshing algorithms, partitioning, and incompatible meshes in 3D simulations, emphasizing the importance of mesh quality and element compatibility.