Concept

System in a package

Related publications (110)

Eco-Conscious Approach to Wireless Gas Monitoring With a Hybrid Printed Passive Sensor Tag

Addressing the environmental impact of electronic waste in biomedical sensing, an eco-conscious approach to the realization of a Chitosan-based Acetone sensor tag for wireless gas monitoring is presented. The fabrication involves inkjet printing of silver ...

Ieee-Inst Electrical Electronics Engineers Inc2024

System-Level Exploration of In-Package Wireless Communication for Multi-Chiplet Platforms

David Atienza Alonso, Marina Zapater Sancho, Giovanni Ansaloni, Rafael Medina Morillas, Joshua Alexander Harrison Klein

Multi-Chiplet architectures are being increasingly adopted to support the design of very large systems in a single package, facilitating the integration of heterogeneous components and improving manufacturing yield. However, chiplet-based solutions have to ...

2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Marina Zapater Sancho, Giovanni Ansaloni, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Integrated silicon photonic MEMS

Niels Quack, Hamed Sattari, Alain Yuji Takabayashi

Silicon photonics has emerged as a mature technology that is expected to play a key role in critical emerging applications, including very high data rate optical communications, distance sensing for autonomous vehicles, photonic-accelerated computing, and ...

SPRINGERNATURE2023

Sub-kHz-Linewidth External-Cavity Laser (ECL) With Si3N4 Resonator Used as a Tunable Pump for a Kerr Frequency Comb

Tobias Kippenberg, Junqiu Liu

Combining optical gain in direct-bandgap III-V materials with tunable optical feedback offered by advanced photonic integrated circuits is key to chip-scale external-cavity lasers (ECL), offering wideband tunability along with low optical linewidths. Exter ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

A 128-kbit GC-eDRAM With Negative Boosted Bootstrap Driver for 11.3x Lower-Refresh Frequency at a 2.5% Area Overhead in 28-nm FD-SOI

Andreas Peter Burg, Robert Giterman, Halil Andac Yigit, Emmanuel Nieto Casarrubias

Gain-cell embedded DRAM (GC-eDRAM) is a high-density logic-compatible alternative to conventional static random-access memory (SRAM) and embedded DRAM (eDRAM). However, GC-eDRAM suffers from a reduced data retention time (DRT) at deeply-scaled process node ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

AstriFlash: A Flash-Based System for Online Services

Babak Falsafi, Lei Yan, Siddharth Gupta, Mark Johnathon Sutherland, Yunho Oh

Modern datacenters host datasets in DRAM to offer large-scale online services with tight tail-latency requirements. Unfortunately, as DRAM is expensive and increasingly difficult to scale, datacenter operators are forced to consider denser storage technolo ...

2022

Thermal and Power-Aware Run-Time Performance Management of 3D MPSoCs with Integrated Flow Cell Arrays

David Atienza Alonso, Marina Zapater Sancho, Giovanni Ansaloni, Alexandre Sébastien Julien Levisse, Halima Najibi

Flow Cell Arrays (FCA) technology employs microchannels filled with an electrolytic fluid to concurrently provide cooling and power generation to integrated circuits (ICs). This solution is particularly appealing for Three-Dimensional Multi-Processor Syste ...

2022

Thermal and Voltage-Aware Performance Management of 3D MPSoCs with Flow Cell Arrays and Integrated SC Converters

David Atienza Alonso, Marina Zapater Sancho, Giovanni Ansaloni, Alexandre Sébastien Julien Levisse, Halima Najibi

Flow cell arrays (FCAs) concurrently provide efficient on-chip liquid cooling and electrochemical power generation. This technology is especially promising for three-dimensional multi-processor systems-on-chip (3D MPSoCs) realized in deeply scaled technolo ...

2022

Micro 3D printing of a functional MEMS accelerometer

Luis Guillermo Villanueva Torrijo, Damien Maillard, Göran Stemme, Simone Pagliano

Microelectromechanical system (MEMS) devices, such as accelerometers, are widely used across industries, including the automotive, consumer electronics, and medical industries. MEMS are efficiently produced at very high volumes using large-scale semiconduc ...

SPRINGERNATURE2022

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.