Roadway air dispersion modeling is the study of air pollutant transport from a roadway or other linear emitter. Computer models are required to conduct this analysis, because of the complex variables involved, including vehicle emissions, vehicle speed, meteorology, and terrain geometry. Line source dispersion has been studied since at least the 1960s, when the regulatory framework in the United States began requiring quantitative analysis of the air pollution consequences of major roadway and airport projects. By the early 1970s this subset of atmospheric dispersion models was being applied to real-world cases of highway planning, even including some controversial court cases.
The basic concept of the roadway air dispersion model is to calculate air pollutant levels in the vicinity of a highway or arterial roadway by considering them as line sources. The model takes into account source characteristics such as traffic volume, vehicle speeds, truck mix, and fleet emission controls; in addition, the roadway geometry, surrounding terrain and local meteorology are addressed. For example, many air quality standards require that certain near worst-case meteorological conditions be applied.
The calculations are sufficiently complex that a computer model is essential to arrive at authoritative results, although workbook-type manuals have been developed as screening techniques. In some cases where results must be refereed (such as legal cases), model validation may be needed with field test data in the local setting; this step is not usually warranted, because the best models have been extensively validated over a wide spectrum of input data variables.
The product of the calculations is usually a set of isopleths or mapped contour lines either in plan view or cross sectional view. Typically these might be stated as concentrations of carbon monoxide, total reactive hydrocarbons, oxides of nitrogen, particulate or benzene.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
The course aims at introducing basic physical aspects of molecular and turbulent diffusion, as well as of dispersion processes, their mathematical modeling, solutions and related environmental applica
The theoretical background and practical aspects of heterogeneous reactions including the basic knowledge of heterogeneous catalysis are introduced. The fundamentals are given to allow the design of m
Air pollution is the contamination of air due to the presence of substances in the atmosphere that are harmful to the health of humans and other living beings, or cause damage to the climate or to materials. It is also the contamination of indoor or outdoor surrounding either by chemical activities, physical or biological agents that alters the natural features of the atmosphere. There are many different types of air pollutants, such as gases (including ammonia, carbon monoxide, sulfur dioxide, nitrous oxides, methane and chlorofluorocarbons), particulates (both organic and inorganic), and biological molecules.
In hydrodynamics, a plume or a column is a vertical body of one fluid moving through another. Several effects control the motion of the fluid, including momentum (inertia), diffusion and buoyancy (density differences). Pure jets and pure plumes define flows that are driven entirely by momentum and buoyancy effects, respectively. Flows between these two limits are usually described as forced plumes or buoyant jets. "Buoyancy is defined as being positive" when, in the absence of other forces or initial motion, the entering fluid would tend to rise.
Air pollutant concentrations, as measured or as calculated by air pollution dispersion modeling, must often be converted or corrected to be expressed as required by the regulations issued by various governmental agencies. Regulations that define and limit the concentration of pollutants in the ambient air or in gaseous emissions to the ambient air are issued by various national and state (or provincial) environmental protection and occupational health and safety agencies.
The deployment of robots for Gas Source Lo- calization (GSL) tasks in hazardous scenarios significantly reduces the risk to humans and animals. Gas sensing using mobile robots focuses primarily on simplified scenarios, due to the complexity of gas dispersi ...
2023
,
We describe a current propagation type return stroke model which is consistent with the estimated distribution of the charge on the leader channel. The model takes into account the dispersion of the return stroke current along the return stroke channel. Th ...
Indian air quality monitoring guideline is directly adopted from World Health Organization (1977) guidelines without place-based modification. According to Indian air quality guidelines (2003), the location of monitoring sites should be determined from air ...