Cloud seeding | EPFL Graph Search

Cloud seeding is a type of weather modification that aims to change the amount or type of precipitation that falls from clouds by dispersing substances into the air that serve as cloud condensation or ice nuclei, which alter the microphysical processes within the cloud. Its effectiveness is debated; some studies have suggested that it is "difficult to show clearly that cloud seeding has a very large effect." The usual objective is to increase precipitation (rain or snow), either for its own sake or to prevent precipitation from occurring in days afterward. Methodologies Salts The most common chemicals used for cloud seeding include silver iodide, potassium iodide and dry ice (solid carbon dioxide). Liquid propane, which expands into a gas, has also been used. This can produce ice crystals at higher temperatures than silver iodide. After promising research, the use of hygroscopic materials, such as table salt, is becoming more popular. When c

Retrieval of ice-nucleating particle concentrations from lidar observations and comparison with UAV in situ measurements

Dimitra Mamali, Athanasios Nenes

Aerosols that are efficient ice-nucleating particles (INPs) are crucial for the formation of cloud ice via heterogeneous nucleation in the atmosphere. The distribution of INPs on a large spatial scale and as a function of height determines their impact on clouds and climate. However, in situ measurements of INPs provide sparse coverage over space and time. A promising approach to address this gap is to retrieve INP concentration profiles by combining particle concentration profiles derived by lidar measurements with INP efficiency parameterizations for different freezing mechanisms (immersion freezing, deposition nucleation). Here, we assess the feasibility of this new method for both ground-based and spaceborne lidar measurements, using in situ observations collected with unmanned aerial vehicles (UAVs) and subsequently analyzed with the FRIDGE (FRankfurt Ice nucleation Deposition freezinG Experiment) INP counter from an experimental campaign at Cyprus in April 2016. Analyzing five case studies we calculated the cloud-relevant particle number concentrations using lidar measurements (n(250,dry) with an uncertainty of 20 % to 40 % and S-dry with an uncertainty of 30 % to 50 %), and we assessed the suitability of the different INP parameterizations with respect to the temperature range and the type of particles considered. Specifically, our analysis suggests that our calculations using the parameterization of Ullrich et al. (2017) (applicable for the temperature range -50 to -33 degrees C) agree within 1 order of magnitude with the in situ observations of n(INp); thus, the parameterization of Ullrich et al. (2017) can efficiently address the deposition nucleation pathway in dust-dominated environments. Additionally, our calculations using the combination of the parameterizations of DeMott et al. (2015, 2010) (applicable for the temperature range -35 to -9 degrees C) agree within 2 orders of magnitude with the in situ observations of INP concentrations (n(INP)) and can thus efficiently address the immersion/condensation pathway of dust and nondust particles. The same conclusion is derived from the compilation of the parameterizations of DeMott et al. (2015) for dust and Ullrich et al. (2017) for soot. Furthermore, we applied this methodology to estimate the INP concentration profiles before and after a cloud formation, indicating the seeding role of the particles and their subsequent impact on cloud formation and characteristics. More synergistic datasets are expected to become available in the future from EARLINET (European Aerosol Research Lidar Network) and in the frame of the European ACTRIS-RI (Aerosols, Clouds, and Trace gases Research Infrastructure). Our analysis shows that the developed techniques, when applied on CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) spaceborne lidar observations, are in agreement with the in situ measurements. This study gives us confidence for the production of global 3D products of cloud-relevant particle number concentrations (n(250,dry,) S-dry and n(INP)) using the CALIPSO 13-year dataset. This could provide valuable insight into the global height-resolved distribution of INP concentrations related to mineral dust, as well as possibly other aerosol types.

2019

Power exhaust by core radiation at COMPASS tokamak

Davide Mancini

Substantial power dissipation in the edge plasma is required for the safe operation of ITER and next-step fusion reactors, otherwise unmitigated heat fluxes at the divertor plasma-facing components (PFCs) would easily exceed their material limits. Traditionally, such heat flux mitigation is linked to the regime of detachment, which is characterised by a significant pressure gradient between upstream and downstream scrape-off layer (SOL). However, the physics phenomena responsible for power dissipation and pressure loss are distinctly different, especially when the power dissipation is achieved by impurity seeding. In principle, it is possible to achieve substantial mitigation of the heat fluxes while maintaining conservation of the pressure along the open field lines in the SOL. This regime can be accessed by injection of medium- or high-Z impurities, which mostly radiate inside the last closed flux surface. The critical question related to such an approach is the effect on confinement and perspective fusion power generation in future thermonuclear reactors. In this work, we report on experiments at COMPASS tokamak, where neon and argon impurities were injected in ohmic or NBI-heated low confinement plasmas. With appropriate seeding waveform, stable scenarios were achieved, avoiding the radiative collapse of plasmas. Significant reduction of heat fluxes at the outer target was observed, with heat flux pattern similar to the one previously achieved by nitrogen seeding. The reduction of downstream pressure was, however, accompanied by an equal reduction of upstream pressure, indicating that the power dissipation occurred inside the separatrix. Indeed, the impurity cooling is causing a significant drop of edge temperature; however, the effect in the plasma centre is much less pronounced.

2021

Changing atmospheric acidity as a modulator of nutrient deposition and ocean biogeochemistry

Yuan Gao, Athanasios Nenes

Anthropogenic emissions to the atmosphere have increased the flux of nutrients, especially nitrogen, to the ocean, but they have also altered the acidity of aerosol, cloud water, and precipitation over much of the marine atmosphere. For nitrogen, acidity-driven changes in chemical speciation result in altered partitioning between the gas and particulate phases that subsequently affect long-range transport. Other important nutrients, notably iron and phosphorus, are affected, because their soluble fractions increase upon exposure to acidic environments during atmospheric transport. These changes affect the magnitude, distribution, and deposition mode of individual nutrients supplied to the ocean, the extent to which nutrient deposition interacts with the sea surface microlayer during its passage into bulk seawater, and the relative abundances of soluble nutrients in atmospheric deposition. Atmospheric acidity change therefore affects ecosystem composition, in addition to overall marine productivity, and these effects will continue to evolve with changing anthropogenic emissions in the future.

AMER ASSOC ADVANCEMENT SCIENCE2021

Retrieval of ice-nucleating particle concentrations from lidar observations and comparison with UAV in situ measurements

Dimitra Mamali, Athanasios Nenes

2019