Home

Concept

Stiffness

Applied sciences
Chemical engineering
Materials science
Deformation of materials

Related publications (29)

About
Privacy
Disclaimer

Graph Chatbot

Active load cell with positive, negative and zero stiffness operating modes for micronewton range contact force monitoring in electrical probing

Simon Nessim Henein, Charles Baur, Hubert Pierre-Marie Benoît Schneegans, Michal Stanislaw Smreczak

This article describes a novel method for applying a contact force in the range of 1 to 100 μN with pointed probe on a microscale sample in order to perform ohmic electrical measurements. The solution is based on the new TIVOT active load cell combining th ...

2022

A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction

Véronique Michaud, Vincent Werlen, Christian Rytka

The development of a robust material model able to accurately describe fibre bed compaction at different strain and strain rates is highly desirable because it is essential for the simulation of many composite manufacturing processes. In this study, we inv ...

2021

Shear Response of Wet Weak Carbonate Rock/Grout Interfaces Under Cyclic Loading

Eleni Stavropoulou

The development and construction of offshore wind farms requires the correct estimation of the friction that can be mobilised at the rock/grout interface. In conventional studies, the shear behaviour of a joint is usually investigated with laboratory tests ...

2021

RC U-shaped walls subjected to in-plane, diagonal, and torsional loading: New experimental findings

Katrin Beyer, Ryan Hoult

Although reinforced concrete U-shaped walls are popular in construction practice internationally, there is a paucity of experimental research investigating the seismic performance of such salient elements. The present paper summarizes an experimental campa ...

2021

Numerical modeling of two-dimensional delamination growth in composite laminates with in-plane isotropy

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

The two-dimensional (2D) delamination growth in fiber-reinforced polymer (FRP) laminates with in-plane isotropy under Mode I loading condition was numerically investigated using finite element analyses. Two sizes of plate models were developed, focusing on ...

2021

Decay of Torsional Stiffness in RC U-Shaped Walls

Katrin Beyer, Ryan Hoult

Reinforced concrete (RC) U-shaped walls are a popular construction choice, commonly used to resist the lateral loads from wind and earthquakes. In many buildings, the center of stiffness of a floor is eccentric from the center of mass and the building will ...

2020

Microstructural simulation and measurement of elastic modulus evolution of hydrating cement pastes

Karen Scrivener, Cyrille Dunant, Arnaud Charles Albert Muller, Arnaud Müller

Predicting the evolution of stiffness in cement paste requires linking morphological properties of the microstructure to the evolution of mechanical properties. Measures are typically difficult to obtain with sufficient time resolution to capture the trans ...

Pergamon-Elsevier Science Ltd2020

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

Véronique Michaud, Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot, Mehmet Kerem Citak, Fatma Nalan Cetin

There is currently considerable interest in developing stiff, strong, tough, and heat resistant poly(lactide) (PLA) based materials with improved melt elasticity in response to the increasing demand for sustainable plastics. However, simultaneous optimizat ...

WILEY2021

Tuning stiffness nonlinearty: theory and applications

Simon Nessim Henein, Ilan Vardi, Mohamed Gamal Abdelrahman Ahmed Zanaty

Perfect elasticity is not achievable in real-life situation, so spring stiffness is not perfectly constant. In this paper, we study the effect of modifying non-linear stiffness terms while keeping the nominal stiffness constant. We introduce three methods ...

ASME2020

Concurrent multiscale modeling and theory of solute-strengthening for dilute and complex concentrated alloys

Shankha Nag

Under common processing conditions, both dilute and complex concentrated alloys are often realized as random alloys, with no correlation in the occupancy of lattice sites by the constituent atom types. The current thesis primary addresses two problems in r ...

EPFL2020

Page 2 of 3

Active load cell with positive, negative and zero stiffness operating modes for micronewton range contact force monitoring in electrical probing

Simon Nessim Henein, Charles Baur, Hubert Pierre-Marie Benoît Schneegans, Michal Stanislaw Smreczak

2022

A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction

Véronique Michaud, Vincent Werlen, Christian Rytka

2021

Tuning stiffness nonlinearty: theory and applications

Simon Nessim Henein, Ilan Vardi, Mohamed Gamal Abdelrahman Ahmed Zanaty

ASME2020