Publications related to Polycarbonate

A Sustainable Printed Chitosan-Based Sensor for Acetone Detection

Biomedical sensing applications, including breath analysis, contribute to increasing the amount of electronic waste, as the sensors are frequently disposed, due to hygienic considerations. Consequently, the development of sustainable sensor solutions is cr ...

IEEE2023

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

WILEY-V C H VERLAG GMBH2022

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Ryan Mitchell van Dommelen, Rubaiyet Iftekharul Haque, Sébastien Lani, Olivier Rémy Henry Chandran

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Oguzhan Oguz, Adrien Julien Demongeot

An amorphous poly(urethane-urea) copolymer composed of 70 wt% poly(ethylene oxide) (PEO) soft segments (SS) (Mw = 2000 g mol−1) and 30 wt% cycloaliphatic hard segments (HS) was subjected to in-situ X-Rays during tensile deformation. Mechanical hardening at ...

2021

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Shreyas Sanjay Joglekar, Hossein Ghasemi Tabasi

The influence of Hf on the heat treatment response of a Laser Powder Bed Fusion (L-PBF) fabricated Ni-base superalloy was investigated. A Hf-free version of CM247LC, CM247LC NHf, and CM247LC (similar to 1.4 wt% Hf) were subjected to identical thermal treat ...

ELSEVIER SCIENCE INC2021

MIL-101(Fe)/g-C3N4 for enhanced visible-light-driven photocatalysis toward simultaneous reduction of Cr(VI) and oxidation of bisphenol A in aqueous media

Kevin Sivula, Nestor Guijarro Carratala, Yongpeng Liu, Feiping Zhao

Heterostructured composites with an excellent photocatalytic activity have attracted increasing attention because of their great application in environmental remediation. Herein, a MIL-101(Fe)/g-C3N4 heterojunction was synthesized via in-situ growth of MIL ...

ELSEVIER2020

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Paul Joseph Dyson, Felix Daniel Bobbink, Antoine Philippe Van Muyden

Combining CO2-chemistry with biomass conversion allows renewable polymeric materials including polycarbonates and polyhydroxyurethanes (PHUs) to be generated. The demand for robust materials with modular properties that can be prepared on an industrial sca ...

2019

D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A

Ulf Anders Hagfeldt, Lin Yang, Xue Bai

Dye-sensitized photocatalytic suspension system for wastewater treatment is still limited in practice due to particle aggregation, fast charge carrier recombination, poor stability and recycling issue. In this study, we combine TiO2 nano-crystalline film w ...

ELSEVIER SCIENCE SA2019

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Polycarbonate

A Sustainable Printed Chitosan-Based Sensor for Acetone Detection

Sustainable polyesters via direct functionalization of lignocellulosic sugars

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

MIL-101(Fe)/g-C3N4 for enhanced visible-light-driven photocatalysis toward simultaneous reduction of Cr(VI) and oxidation of bisphenol A in aqueous media

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A

Synthesis, characterisation and cytotoxicity studies of ruthenium arene complexes bearing trichlorogermyl ligands

Graph Chatbot

Chat with Graph Search

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

MIL-101(Fe)/g-C3N4 for enhanced visible-light-driven photocatalysis toward simultaneous reduction of Cr(VI) and oxidation of bisphenol A in aqueous media

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Synthesis, characterisation and cytotoxicity studies of ruthenium arene complexes bearing trichlorogermyl ligands