Publications associées à Polycarbonate

Sustainable polyesters via direct functionalization of lignocellulosic sugars

François Maréchal, Harm-Anton Klok, Véronique Michaud, Jeremy Luterbacher, Yves Leterrier, Maxime Alexandre Clément Hedou, Adrien Julien Demongeot, Graham Reid Dick, Christèle Rayroud, Thibault Rambert

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the ...

2022

Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures

Cyril Dénéréaz

3D printing is a powerful manufacturing technology for shaping materials into complex structures. While the palette of printable materials continues to expand, the rheological and chemical requisites for printing are not always easy to fulfill. Here, a uni ...

Wiley-V C H Verlag Gmbh2022

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen, Olivier Rémy Henry Chandran

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

An amorphous poly(urethane-urea) copolymer composed of 70 wt% poly(ethylene oxide) (PEO) soft segments (SS) (Mw = 2000 g mol−1) and 30 wt% cycloaliphatic hard segments (HS) was subjected to in-situ X-Rays during tensile deformation. Mechanical hardening at ...

2021

En route to CO2-containing renewable materials: catalytic synthesis of polycarbonates and non-isocyanate polyhydroxyurethanes derived from cyclic carbonates

Paul Joseph Dyson, Felix Daniel Bobbink, Antoine Philippe Van Muyden

Combining CO2-chemistry with biomass conversion allows renewable polymeric materials including polycarbonates and polyhydroxyurethanes (PHUs) to be generated. The demand for robust materials with modular properties that can be prepared on an industrial sca ...

Royal Society of Chemistry2019

D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A

Ulf Anders Hagfeldt, Lin Yang, Xue Bai

Dye-sensitized photocatalytic suspension system for wastewater treatment is still limited in practice due to particle aggregation, fast charge carrier recombination, poor stability and recycling issue. In this study, we combine TiO2 nano-crystalline film w ...

ELSEVIER SCIENCE SA2019

Assessing the life cycle costs and environmental performance of lightweight materials in automobile applications

Véronique Michaud, Christian Ludwig, Jérôme Payet, Robert Andrew Witik

Life cycle assessment (LCA) and manufacturing focused life cycle costing are used to evaluate the potential advantages of composites in automotive applications. The life cycle costs and environmental performance of several suitable lightweight polymer comp ...

2011

Anodic oxidation of phenol on Ti/IrO2 electrode: Experimental studies

Stéphane Fierro

The electrochemical oxidation of acidic solutions of phenol on a Ti/IrO2 anode has been investigated by cyclic voltammetry and bulk electrolysis in a single-compartment cell. In the potential region of oxygen evolution, anodic oxidation resulted in electro ...

Elsevier2010

Measurement of the x-ray dose-dependent glass transition temperature of structured polymer films by x-ray diffraction

Christian David

The glass transition temperature (Tg) of polymer nanostructures was measured using a technique based on synchrotron x-ray diffraction from periodic grating structures. Poly(methyl methacrylate) (PMMA) nanostructures consisting of 1:1 lines:spaces with a 10 ...

2007

Fiber reinforced polypropylene nanocomposites

Chrystèle Houphouet-Boigny Favre

The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...

EPFL2007