Archimedes' screw | EPFL Graph Search

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

The Archimedes screw, also known as the Archimedean screw, hydrodynamic screw, water screw or Egyptian screw, is one of the earliest hydraulic machines. Using Archimedes screws as water pumps (Archimedes screw pump (ASP) or screw pump) dates back many centuries. As a machine used for transferring water from a low-lying body of water into irrigation ditches, water is pumped by turning a screw-shaped surface inside a pipe. In the modern world, Archimedes screw pumps are widely used in wastewater treatment plants and for dewatering low-lying regions. Archimedes Screws Turbines (ASTs) are a new form of small hydroelectric powerplant that can be applied even in low head sites. Archimedes screw generators operate in a wide range of flows (0.01 to 14.5 ) and heads (0.1 m to 10 m), including low heads and moderate flow rates that is not ideal for traditional turbines and not occupied by high performance technologies. The Archimedes screw is a reversible hydraulic machine, and there are several examples of Archimedes screw installations where the screw can operate at different times as either pump or generator, depending on needs for power and watercourse flow. Archimedes screw is named after Greek mathematician Archimedes who first described it around 234 BC, although there is evidence that the device had been used in Ancient Egypt long before his time. A screw conveyor is a similar device which transports bulk materials such as powders and grains. The screw pump is the oldest positive displacement pump. The first records of a water screw, or screw pump, date back to Hellenistic Egypt before the 3rd century BC. The Egyptian screw, used to lift water from the Nile, was composed of tubes wound round a cylinder; as the entire unit rotates, water is lifted within the spiral tube to the higher elevation. A later screw pump design from Egypt had a spiral groove cut on the outside of a solid wooden cylinder and then the cylinder was covered by boards or sheets of metal closely covering the surfaces between the grooves.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (2)

Related concepts (16)

Related lectures (63)

Related MOOCs (1)

Learning-based approaches for feature fusion in multi-modal indoor localization

Vincent Cabrini

Due to their aptitude to capture complex dependencies, neural networks are a promising candidate for indoor localization. Omnipresent phenomena such as multi-path signal propagation, shadowing and device noise introduce non-linear effects in the data, and make conventional geometry-based methods fail even in simple environments. This semester project explores few analytical outlier rejection algorithms and new fusion methods based on neural networks and compares them with an analytical model.

2020

Solar Impulse – Thermal simulation of the electronic circuit board

Laurie Saunders

The goal of this semester project is to create a thermal model of a electronic circuit board that will be used to control a Brushless DC motor for the project “Solar Impulse”. For this project, the finite element (FEM) software Ansys is used to build the model and to then apply the thermal loads. The software will calculate the temperature of the circuit board. The modeling using FEM is applied as it is not possible to make an analytical model for a complicated configuration like in this case.

2004

Windpump

A windpump is a type of windmill which is used for pumping water. Windpumps were used to pump water since at least the 9th century in what is now Afghanistan, Iran and Pakistan. The use of wind pumps became widespread across the Muslim world and later spread to China and India. Windmills were later used extensively in Europe, particularly in the Netherlands and the East Anglia area of Great Britain, from the late Middle Ages onwards, to drain land for agricultural or building purposes.

Archimedes' screw

Hellenistic period

In classical antiquity, the Hellenistic period covers the time in Mediterranean history after Classical Greece, between the death of Alexander the Great in 323 BC to the death of Cleopatra VII (30 BC) followed by the emergence of the Roman Empire, as signified by the Battle of Actium in 31 BC and the conquest of Ptolemaic Egypt the following year. The Ancient Greek word Hellas (Ἑλλάς, Hellás) was gradually recognized as the name for Greece, from which the word Hellenistic was derived.

Fluid Mechanics: Ludion Experiment

Explores the Ludion experiment in fluid mechanics, demonstrating pressure, weight, and compression effects.

Forces and Motion on Inclined Plane PHYS-101(e): General physics : mechanics

Explores forces and motion on an inclined plane, analyzing minimum mass requirements and velocity calculations.

Hydrostatic Forces: Equilibrium and Principles ME-271: Fluid flow

Covers hydrostatic forces, equilibrium in fluid systems, and solutions to hydrostatic conundrums.