Concept

Quadrupole magnet

Related publications (52)

Analysis of Quench Detection and Protection of a Nb3Sn CCT Technology Demonstrator Dipole for FCC

From 2016, Paul Scherrer Institut (PSI) started an activity related to developing design, construction and testing of the superconducting magnets. My thesis work is part of this activity and mainly concerns the design and construction of an innovative high ...

EPFL2020

, ,

Hadron and proton therapy are cutting edge techniques for cancer treatment and a great development of specialized medical centers and research facilities is foreseen in the next decades. One of the main obstacles to the penetration of the use of charged pa ...

2020

Magnetic and Mechanical 3-D Modelling of a 15 T Large Aperture Dipole Magnet

Pierluigi Bruzzone, Luca Bottura, Douglas Martins Araujo

In 2018, two structures have been proposed with the goal of replacing the magnetEDIPOthat stopped operating in 2016. These two solutions were designed to generate a field of 15 T on an aperture of 100 x 150 mm2 at 4.2 K by using Nb 3Sn superconducting Ruth ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

Preliminary Tests of Soldered and Diffusion-Bonded Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Davide Uglietti, Mithlesh Kumar, Vincenzo D'Auria

High-field accelerator magnets of the next generation will require coil grading in order to decrease the amount of superconductor and hence the magnet cost. The joints between Nb3Sn conductor grades must have low electrical resistance (

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

Stability modeling of the LHC Nb-Ti Rutherford cables subjected to beam losses

Luca Bottura, Enrico Felcini

The Large Hadron Collider (LHC) at CERN is being prepared for its full energy exploitation during Run III, i.e. an increase of the beam energy beyond the present 6.5 TeV, targeting the maximum discovery potential attainable. This requires an increase of th ...

2019

, , , , , ,

A future circular collider (FCC) with a center-of-mass energy of 100 TeV and a circumference of around 100 km, or an energy upgrade of the LHC (HE-LHC) to 27 TeV require bending magnets providing 16 Tin a SO-mm aperture. Several development programs for th ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2019

High temperature superconducting (HTS) materials have the potential to generate a magnetic field beyond the level obtainable with low temperature superconducting (LTS) materials. This review reports on past and present R&D on HTS cables and conductors for ...

2019

AMS-100: The next generation magnetic spectrometer in space - An international science platform for physics and astrophysics at Lagrange point 2

Davide Uglietti, Thomas Günther Bretz

The next generation magnetic spectrometer in space, AMS-100, is designed to have a geometrical acceptance of 100 m(2) sr and to be operated for at least ten years at the Sun-Earth Lagrange Point 2. Compared to existing experiments, it will improve the sens ...

2019

Status of CEA Magnet Design Tools and Applications to EU DEMO PF and CS Magnets

Kamil Sedlák

In the framework of the design activities conducted in the EU for dimensioning the future fusion demonstration reactor (DEMO), extensive analyses were carried out within the framework of the EUROfusion consortium, with the objective of defining the design ...

2018

Soft Magnets Implementation using a Stereolithography-based 3D Printer

Yves Perriard, Paolo Germano, Cécile Gisèle Aimée Jeannine Cuchet, Augustin Muster

A wide part of the proposed paper is devoted to designing soft magnets using a stereolithography 3D printer. A state of the art on soft magnetic materials is carried out together with an overview of the existing printing technologies to obtain complex non- ...

2017

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.