Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Rock fall hazard zoning is a challenging yet necessary task to be accomplished for planning an appropriate land use in mountainous areas. Methodologies currently adopted for elaborating zoning maps do not provide satisfactory results though, due to uncerta ...
Reinforced concrete (RC) structures with tri-dimensional asymmetries tend to exhibit torsional effects that are of great concern in the field of earthquake engineering, in particular at large ductility levels where they become more relevant [MAN09]. In nuc ...
A thorough four-step performance-based seismic evaluation for a six-story unreinforced masonry building is conducted. Incremental dynamic analysis is carried out using the applied element method to take advantage of its ability to simulate progressive coll ...
Fling-step and forward directivity, which can impose unexpected seismic demands on structures, are the main consequences of near-fault earthquakes. Although the adverse effect of forward directivity on structures behavior is determined to some level, the i ...
Filling materials may exist in all scales of rock fractures, not only influencing seismic wave attenuation, but controlling rock mass instability. The objective of this study is to experimentally investigate the seismic response of rock fractures filled wi ...
Fragility functions that permit the estimation of damage in pre-1994 welded flange bolted-web beam-to-column moment connections are developed. The fragility functions provide estimates of the probability of yielding and of experiencing fracture as a functi ...
Seismic verification of existing buildings in Switzerland is currently assessed by the pre-standard 2018. In the seismic evaluation of existing buildings in that document, a minimal acceptable seismic safety must be verified, as well as proportional level ...
We propose a novel approach to the real-time landing site detection and assessment in unconstrained man-made environments using passive sensors. Because this task must be performed in a few seconds or less, existing methods are often limited to simple loca ...
Recent earthquakes around the world have demonstrated that steel moment-frame buildings designed based on older seismic provisions are seismically deficient. To enhance the seismic performance of these buildings, a new seismic retrofit system has been deve ...
As an approach to the problem of seismic vulnerability evaluation of existing buildings using the predicted vulnerability method, numerical models can be applied to define fragility curves of typical buildings which represent building classes. These curves ...