Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The mechanical properties of Fe-Mn-Al-C steel are significantly enhanced after κ-carbide precipitation via aging; however, most aging treatments are energy demanding because they require relatively high temperatures and extended holding times. This researc ...
We show that the selected area diffraction patterns presented in a recent paper (T. Liu et al. Sci. Rep. 2015 5, 15331) do not prove the existence of a new hexagonal phase in martensitic steels. They can be actually simulated by twin effects. ...
In this paper research work on welded butt weld connections between hot-rolled seamless tubes and steel castings are presented. Comparison is made between different weld preparations for the butt welds including different steel grades, repair methods, the ...
We want to discuss the interpretation of low-temperature shoulder internal friction peak of Snoek-Koster peak (LTS-SK). Lu et al. (2015) [1] attributed it to the interaction between the carbon atoms and twin boundaries in martensite. Nevertheless, the decr ...
This study concerns the evolution of the thermomechanical properties of new high-performance materials. In particular, we focus on the relationship between the microstructure and the mechanical properties of a superalloy based on Co-Ni-Cr. Superalloys are ...
The austenite/martensite (fcc/bcc) interface is prevalent across many new classes of high-strength steels, and yet both its fundamental structure and its mechanism of motion remain uncertain in spite of decades of research. Here, atomistic simulations are ...
The formation of Cu-Mg clusters in an Al-Cu-Mg aluminum alloy is observed by small-angle X-ray scattering during cooling. Cooling rates are choosen to mimic the different conditions obtained at the surface and in the center of large forgings. Clusters of 0 ...
Residual stress state in planar tubular K-joints, in the chord within the gap region between the two braces, is studied using numerical weld modelling. The motivation comes from past full-scale fatigue tests on tubular trusses made of various steel grades ...
In the fabrication of heat treatable aluminium parts, solutionising and quenching are key steps in order to obtain the required mechanical characteristics. Fast quenching is necessary to avoid coarse precipitation as this one reduces the mechanical propert ...
The remarkable microstructural stability of high chromium steels prepared by powder metallurgy and strengthened by dispersion of nanometric yttrium oxides in cyclic loading at high temperatures is reported. Contrary to the continuous cyclic softening and p ...