Concept

Thermal spraying

Related publications (47)

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

AbstractThe degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these c ...

EPFL2024

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

Michele Fadone

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or Hydroge ...

MDPI2023

Nanocrystals as Precursors in Solid-State Reactions for Size- and Shape-Controlled Polyelemental Nanomaterials

Raffaella Buonsanti, Emad Oveisi, Anna Loiudice, Dragos-Constantin Stoian, Valeria Mantella, Chethana Janardhana Gadiyar, Pranit Srinivas Iyengar, Laia Castilla Amorós

Solid-state reactions between micrometer-size powders are among the oldest, simplest, and still widely used methods for the fabrication of inorganic solids. These reactions are intrinsically slow because, although the precursorsare "well mixed" at the macr ...

AMER CHEMICAL SOC2020

Iron-coated polymer films with high antibacterial activity under indoor and outdoor light, prepared by different facile pre-treatment and deposition methods

César Pulgarin, Sami Rtimi, Stefanos Giannakis, Ania Schärer

In the present work, we study the fabrication of self-cleaning antibacterial surfaces, active under indoor or outdoor light. In order to obtain the highest activity with the lowest complexity we assess mild conditions of preparation (temperatures), pre-tre ...

ELSEVIER SCIENCE BV2019

The role of nanocrystalline binder metallic coating into WC after additive manufacturing

Jamasp Jhabvala, Eric Boillat

Tungsten carbide with microsized particle powders are commonly used embedded in a tough binder metal. The application of these composites is not limited to cutting tools, WC based material has been increasingly used in gaskets and other mechanical parts wi ...

Elsevier2018

Single crystal diamond micro-disk resonators by focused ion beam milling

Niels Quack, Teodoro Graziosi, Sichen Mi

We report on single crystal diamond micro-disk resonators fabricated in bulk chemical vapor deposition diamond plates (3 mm x 3 mm x 0.15 mm) using a combination of deep reactive ion etching and Focused Ion Beam (FIB) milling. The resulting structures are ...

AMER INST PHYSICS2018

Mobility law of dislocations with several character angles and temperatures in FCC Aluminum

Jean-François Molinari, Guillaume Anciaux, Jaehyun Cho

We study the mobility law of dislocations in aluminum as an important building block for the development of a multiscale method that couples an atomistic model with discrete dislocation dynamics in 3d (\eg CADD3d). Straight dislocations of arbitrary charac ...

Elsevier2017

Tribocorrosion and electrochemical behaviour of nanocrystalline diamond coated Ti based alloys for orthopaedic application

Stefano Mischler, Shoufan Cao

Metallic implants such as hip and knee often fail due to the combined action of wear and corrosion. Nanocrystalline diamond (NCD) coatings on metallic implants can be a potential candidate to overcome this issue. In this work, we investigated the tribocorr ...

Elsevier2017

Mechanical and microstructural characteristics of Ti6Al4V/AA2519 and Ti6Al4V/AA1050/AA2519 laminates manufactured by explosive welding

Marco Cantoni

The aim of the work was to produce laminated structures consisting of Ti-6Al-4V alloy and AA2519 plates and to investigate their microstructure and mechanical properties with anemphasis on the role of an additional AA1050 interlayer. Explosive welding was ...

Elsevier Sci Ltd2016

New approach to low thermal conductivity of thermal barrier protection with improved mechanical integrity

Heinrich Hofmann, Paul Bowen, Abhishek Tewari

Layered ceramic systems with designed stacks of dense and porous layers were investigated as alternative for thermal barrier protection system (TBPs). This approach gives the possibility to obtain low thermal conductivity with the impact protection of dens ...

Elsevier2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.