Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Lead zirconate titanate (Pb(Zr1-xTix)O3 or PZT) ferroelectric ceramics have been widely used in transducers, actuators, and sensors, since they posses high dielectric and piezoelectric properties with a relatively high temperature of operation. Commerciall ...
A series of C-doped, W-doped, and C,W-codoped TiO2 samples have been prepared using modified sol-gel techniques. Reproducible inexpensive C-doping arises from the presence of melamine borate in a sol-gel mixture, whereas W-doping is from the addition of tu ...
In this contribution, we study the increase in metalorganic-low pressure chemical vapor deposited (MO-LPCVD) ZnO thin films conductivity by hydrogen plasma post-treatment. We show that this improvement is linked to defect passivation at grain boundaries, d ...
Three different types of nanocryst., N-doped TiO2 electrodes were synthesized using several nitrogen dopants through wet methods. The obtained nanocryst., N-doped TiO2 electrodes possessed different crystallite sizes, surface areas, and N-doping amts. Char ...
The dielectric response of hard (Fe-doped) and soft (Nb-doped) rhombohedral Pb(Zr0.58Ti0.42)1−xMexO3 (Me=Fe or Nb) ceramics was studied at subswitching conditions over a wide range of temperatures (50– 450 °C) and frequencies (10 mHz to 10 kHz). The result ...
In this study, we present the results and implications of an experimental study into the effect of gold-ion implantation on the actuation performance of ionic-type conducting polymer actuators, represented here by cantilevered tri-layer polypyrrole (PPy) a ...
Electrically Detected Magnetic Resonance (EDMR) was used to investigate the influence of dye doping on spin-dependent exciton formation in aluminum (III) 8-hydroxyquinoline (Alq(3)) based Organic Light Emitting Diodes (OLEDs) with different device structur ...
Photostructurable polymers, such as SU-8, have large potential impact on the field of MEMS/NEMS, allowing simple fabrication of plastic MEMS/NEMS devices with nearly vertical sidewalls and high aspect ratios using standard photolithographic procedures. Fun ...
A novel method allowing rapid production of reliable composites with increased dielectric constant and high dielectric strength for dielectric elastomer actuators (DEA) is reported. The promising approach using composites of conductive particles and insula ...
Magnetic field effects on the conductivity of different types of organic devices: undoped and dye doped aluminium (III) 8-hydroxyquinoline (Alq3)-based organic light emitting diodes (OLEDs), electrononly Alq3-based diodes, and a hole-only N,N'-diphenyl-N,N ...
