Cyril Cayron1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.
Emad OveisiDr Emad Oveisi is a senior scientist at the Interdisciplinary Centre for Electron Microscopy (CIME), EPFL.
Emad received a BSc in Metallurgy and Materials Engineering (2005) and an MSc in Materials Science (2008) both from the University of Tehran (Iran). He graduated with a PhD in Materials Science and Engineering at EPFL in 2014 for a thesis on the "Three-Dimensional STEM Imaging of Dislocations" under the direction of Prof. Cécile Hébert. The PhD thesis at the Electron Spectrometry and Microscopy Laboratory (LSME), served as an introduction to many of the advanced microscopy techniques that have proven to be a platform for his research career. A post-doctoral research at the centre for electron microscopy gave him the opportunity to peruse a cutting-edge research on one of the most modern aberration-corrected transmission electron microscopes.Since the inauguration of the Energypolis campus of EPFL in Sion, he has been the manager and reference scientist of the electron microscopy platform of EPFL-Valais, working with 9 research groups and more than 200 researchers. In addition to this core responsibility, he provides advanced microscopy consulting and service to EPFL scientists and assist their research to the highest level possible.
Emad Oveisi’s research focuses on the application and development of novel electron microscopy techniques, with emphasis on 3D imaging of crystal defects, as well as the precision measurement of materials properties using aberration-corrected S/TEM. In 2018, he received the prestigious Microscopy Innovation Award for inventing “Single-shot three-dimensional electron imaging”, a novel technique that enables 3D imaging of in situ dynamics.
In 2016 Emad was elected as an interim representative for the scientific staff ("corps intermédiaire") to the Council of the Institute of Chemistry (ISIC). Since 2019, he is a member of EPFL Teachers’ Council (CCE) and has been elected as one of its four bureau members. This role allows him to be exposed to new ideas and pedagogical challenges, as well being involved in discussions with the Vice Presidency of Education (VPE) and other teaching organisations for defining teaching strategies at the EPFL.
Marco Cantoni1982-1988, Diploma course in Experimental Physics (certificate, 28.10.88)ETHZ Faculty IX MATHEMATICS and PHYSICS, Diploma Thesis: "Abweichungen von der ikosaedrischen Symmetrie in Al-Cu-Li Quasikristallen", Advisor: Prof. H.-U. Nissen 1989-1993, Ph.D. in Experimental Physics (certificate, 23.8.94) ETHZ Physics Department, Laboratory of Solid State Physics, Ph. D. Thesis No. 10421, Title: "Elektronenmikroskopische Untersuchung der Realkristallstruktur epitaktischer Schichten von Supraleitern des Typs SEBa2Cu3O7-x auf (100)-SrTiO3" Advisors: Prof. H.R. Ott, Prof. H. U. Nissen. 1994-1996,ETH Zürich,Material Science Department, Non-Metallic Materials, Prof. L. Gauckler: Microstructure characterisation of high-tech ceramic materials by means of SEM, TEM and atomic force microscopy: superconductor thick films (Bi-2212 on Ag) and solid oxide fuel cells (ZrO2, CeO2). 1996-1998, National Institute for Research in Inorganic Materials NIRIM, Japan Group for Special Research, Prof. S. Horiuchi: TEM of Bi-2223/Ag Tapes, Application of Imaging Plates (IP) in High Voltage TEM, Cryo-Lorentz-TEM of Superconducting Materials (Observation of Flux-Lines) 1998-2000, Ecole polytechnique fédéral de Lausanne, EPFL-CIME Centre interdépartemental de microscopie électronique CIME, Prof. P.A. Buffat: Projet 125, PPO II (programme prioritaire optique): Characterization of materials and devices for optic and optoelectronic applications by electron microscopy. 2001-2003, Ecole polytechnique fédéral de Lausanne, EPFL STI IMX LCCeramics Laboratory, Prof. Nava Setter Characterisation of ferroelectric materials, transmission electron microscopy of relaxor ferroelectric materials 2004, University of Geneva, Physics Department, Condensed matter Physics Group of Prof. R. Flükiger, TEM of Multifilament Nb3Sn superconducting wires, in collaboration with EPFL-CIME Since 1.11.04, EPFL-SB-CIME
Duncan Thomas Lindsay AlexanderDuncan Alexander graduated with a PhD in Materials Science and Metallurgy at the University of Cambridge in 2003 for a thesis on the kinetics of metallurgical phase transformations under the direction of Lindsay Greer. From 2003 to 2007 he held a Royal Society Overseas Research Fellowship at the University of Sydney, and then post-doctoral positions at the University of Cambridge and Arizona State University, working first on materials electrochemistry with Carsten Schwandt and Derek Fray, and then the characterization of atmospheric aerosol particles with Peter Crozier and Jim Anderson. In 2007 he came to EPFL as a scientific collaborator in the group of László Forró, and from 2008 to 2017 he was a staff scientist at EPFL’s Interdisciplinary Centre for Electron Microscopy (CIME), specializing in the application of advanced transmission electron microscopy techniques and enabling electron microscopy research activities for groups across EPFL through teaching, training and support. In 2018 he joined the Electron Spectrometry and Microscopy Laboratory (LSME) as a full-time research scientist dedicated to advancing transmission electron microscopy techniques, and was promoted to the status of Research and Teaching Associate. In 2019, together with LSME director Cécile Hébert, he launched the first MOOC on transmission electron microscopy for materials science: https://www.coursera.org/learn/microscopy/For a complete list of peer-reviewed publications, see:https://orcid.org/0000-0003-4350-8587 Franz-Josef HaugI studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.
Theo LasserDe nationalité allemande, né en 1952 à Lauchheim (Baden-Württemberg). Après des études de physique à l'Université Fridericiana de Karlsruhe, il y obtient son diplôme de physique en 1978.
En 1979, il rejoint l'Institut de Recherches franco-allemand à Saint-Louis (France) comme collaborateur scientifique. En 1986, il rejoint la division de recherche de Carl Zeiss à Oberkochen (Allemagne) où il développe principalement divers systèmes laser pour des applications médicales. Dès 1990, il dirige le laboratoire laser de la division médicale. En 1993, il prend la direction de l'unité "laser d'ophtalmologie". Dès le début 1995, il est chargé de restructurer et regrouper les nombreuses activités d'ophtalmologie chez Carl Zeiss et de les transférer à Jena. Durant cette période, il réalise des nouveaux instruments de réfraction, des biomicroscopes et des caméras rétiniennes.
Dès janvier 1998, il dirige la recherche de Carl Zeiss à Jena où il initie de nouveaux projets en microscopie, en microtechnique et en recherche médicale. En juillet 1998, il est nommé professeur ordinaire en optique biomédicale à l'Institut d'optique appliquée. Au sein du Département de microtechnique, son activité de recherche porte sur la photonique biomédicale. Il participe à l'enseignement d'optique et d'instrumentation biomédicale.
Short CV
1972 Physics University of Karlsruhe (Germany)
1979 l'Institut de Recherches franco-allemand à Saint-Louis (France)
1986 central research division Carl Zeiss, Oberkochen (Germany)
1990 Med - Division, ophthalmic lasers
1994 Ophthalmology division, Carl Zeiss Jena
1998 Head of Central research Carl Zeiss Jena
1998 full Professor Ecole Polytechnique Federale Lausanne, Switzerland
