Nuclear marine propulsion is propulsion of a ship or submarine with heat provided by a nuclear reactor. The power plant heats water to produce steam for a turbine used to turn the ship's propeller through a gearbox or through an electric generator and motor. Nuclear propulsion is used primarily within naval warships such as nuclear submarines and supercarriers. A small number of experimental civil nuclear ships have been built.
Compared to oil- or coal-fuelled ships, nuclear propulsion offers the advantage of very long intervals of operation before refueling. All the fuel is contained within the nuclear reactor, so no cargo or supplies space is taken up by fuel, nor is space taken up by exhaust stacks or combustion air intakes. The low fuel cost is offset by high operating costs and investment in infrastructure however, so nearly all nuclear-powered vessels are military.
Most naval nuclear reactors are of the pressurized water type, with the exception of a few attempts at using liquid sodium-cooled reactors. A primary water circuit transfers heat generated from nuclear fission in the fuel to a steam generator; this water is kept under pressure so it does not boil. This circuit operates at a temperature of around . Any radioactive contamination in the primary water is confined. Water is circulated by pumps; at lower power levels, reactors designed for submarines may rely on natural circulation of the water to reduce noise generated by the pumps.
The hot water from the reactor heats a separate water circuit in the steam generator. That water is converted to steam and passes through steam driers on its way to the steam turbine. Spent steam at low pressure runs through a condenser cooled by seawater and returns to liquid form. The water is pumped back to the steam generator and continues the cycle. Any water lost in the process can be made up by desalinated sea water added to the steam generator feed water.
In the turbine, the steam expands and reduces its pressure as it imparts energy to the rotating blades of the turbine.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In this course, one acquires an understanding of the basic neutronics interactions occurring in a nuclear fission reactor as well as the conditions for establishing and controlling a nuclear chain rea
The main objective of the course is to provide an overview of space propulsion systems. The course will also describe the basic design principles of propulsion systems.
This course is intended to understand the engineering design of nuclear power plants using the basic principles of reactor physics, fluid flow and heat transfer. This course includes the following: Re
A nuclear submarine is a submarine powered by a nuclear reactor, but not necessarily nuclear-armed. Nuclear submarines have considerable performance advantages over "conventional" (typically diesel-electric) submarines. Nuclear propulsion, being completely independent of air, frees the submarine from the need to surface frequently, as is necessary for conventional submarines.
Ship commissioning is the act or ceremony of placing a ship in active service and may be regarded as a particular application of the general concepts and practices of project commissioning. The term is most commonly applied to placing a warship in active duty with its country's military forces. The ceremonies involved are often rooted in centuries-old naval tradition. Ship naming and launching endow a ship hull with her identity, but many milestones remain before she is completed and considered ready to be designated a commissioned ship.
An icebreaker is a special-purpose ship or boat designed to move and navigate through ice-covered waters, and provide safe waterways for other boats and ships. Although the term usually refers to ice-breaking ships, it may also refer to smaller vessels, such as the icebreaking boats that were once used on the canals of the United Kingdom. For a ship to be considered an icebreaker, it requires three traits most normal ships lack: a strengthened hull, an ice-clearing shape, and the power to push through sea ice.