Publications related to Differential scanning calorimetry

Interbands Phase Models for Polychromatic Image Reconstruction in Optical Interferometry

Alessio Ferrari, Ferréol Arnaud Marie Soulez

This paper presents an extension of the spatio-spectral ("3D") image reconstruction algorithm called PAINTER (Polychromatic opticAl INTErferometric Reconstruction software). The algorithm is able to solve large scale problems and relies on an iterative pro ...

SPIE2016

Impact of water activity on the stability of ettringite

Karen Scrivener, Thomas Matschei

The stability of ettringite as function of temperature and water vapour pressure was studied on synthetic samples using X-ray diffraction, thermogravimetric analysis, sorption balance measurements and different calorimetry techniques. Crystalline ettringit ...

Pergamon-Elsevier Science Ltd2016

Curing kinetics and thermomechanical properties of latent epoxy/carbon fiber composites

Véronique Michaud, Pierre-Etienne Bourban, Sara Dalle Vacche

In this work, resins based on diglycidyl ether of bisphenol A (DGEBA) epoxy and a latent hardener, dicyandiamide (DICY), as well as carbon fiber (CF) composites based on them, were prepared with three commercial accelerators: a methylene bis (phenyl dimeth ...

Iop Publishing Ltd2016

Temperature Dependent Impedance Spectroscopy and Thermally Stimulated Depolarization Current (TSDC) Analysis of Disperse Red 1-co-Poly(methyl methacrylate) Copolymers

Frank Nüesch, Yee Song Ko

The dielectric relaxation processes of polymethyl methacrylates that have been functionalized with Disperse Red 1 (DR1) in the side chain (DR1-co-MMA) were studied with temperature dependent impedance spectroscopy and thermally stimulated depolarization cu ...

Spie-Int Soc Optical Engineering2016

Hydrophilic Interaction Between Low-Coordinated Au and Water: H2O/Au(310) Studied with TPD and XPS

Maarten Eduard van Reijzen

In this work, we study the relatively weak H2O Au interaction on the highly stepped and anisotropic (310) surface with temperature-programmed desorption and X-ray photoelectron spectroscopy. Compared to Au(111), we report an enhanced adsorption energy of H ...

Amer Chemical Soc2016

Rapid screening tests for supplementary cementitious materials: past and future

Karen Scrivener, Ruben Anton Snellings

Rapid screening tests for supplementary cementitious materials (SCMs) have been in use for over 150 years. Over the years a multitude of methods have been put forward to predict the strength development of SCMblended mortars and concrete. This paper summar ...

Springer2016

Branched methoxydiphenylamine-substituted fluorene derivatives as hole transporting materials for high-performance perovskite solar cells

Michael Graetzel, Mohammad Khaja Nazeeruddin, Michael Saliba, Paul Gratia, Taisuke Matsui, Simona Urnikaite

Small-molecule hole transporting materials based on methoxydiphenylamine-substituted fluorene fragments were synthesized and incorporated into a perovskite solar cell, which displayed a power conversion efficiency of up to 19.96%, one of the highest conver ...

Royal Soc Chemistry2016

Predictive Models for Thermal Behavior of Chemicals with Quantitative Structure-Property Relationships

Thierry Meyer, Annik Nanchen, Francis Stoessel, Nadia Baati

Most processes in the chemical industry involve potentially hazardous steps. It is thus of critical importance to perform risk assessments and to know the thermal behavior of the chemicals at stake. A widely used thermal analysis, differential scanning cal ...

Wiley-Blackwell2015

Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency

Michael Graetzel, Shaik Mohammed Zakeeruddin, Daniel Prochowicz, Marius Franckevicius

We present a facile mechanochemical route for the preparation of hybrid CH3NH3PbI3 (MAPbI(3)) perovskite particles with the size of several hundred nanometers for high-efficiency thin-film photovoltaic devices. Powder X-ray diffraction measurements demonst ...

Royal Society of Chemistry2015

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Differential scanning calorimetry

Interbands Phase Models for Polychromatic Image Reconstruction in Optical Interferometry

Impact of water activity on the stability of ettringite

Curing kinetics and thermomechanical properties of latent epoxy/carbon fiber composites

Temperature Dependent Impedance Spectroscopy and Thermally Stimulated Depolarization Current (TSDC) Analysis of Disperse Red 1-co-Poly(methyl methacrylate) Copolymers

Hydrophilic Interaction Between Low-Coordinated Au and Water: H2O/Au(310) Studied with TPD and XPS

Rapid screening tests for supplementary cementitious materials: past and future

Branched methoxydiphenylamine-substituted fluorene derivatives as hole transporting materials for high-performance perovskite solar cells

Predictive Models for Thermal Behavior of Chemicals with Quantitative Structure-Property Relationships

Understanding and analyzing freezing-point transitions of confined fluids within nanopores

Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency

Graph Chatbot

Chat with Graph Search

Temperature Dependent Impedance Spectroscopy and Thermally Stimulated Depolarization Current (TSDC) Analysis of Disperse Red 1-co-Poly(methyl methacrylate) Copolymers

Interbands Phase Models for Polychromatic Image Reconstruction in Optical Interferometry

Impact of water activity on the stability of ettringite

Rapid screening tests for supplementary cementitious materials: past and future

Hydrophilic Interaction Between Low-Coordinated Au and Water: H2O/Au(310) Studied with TPD and XPS

Branched methoxydiphenylamine-substituted fluorene derivatives as hole transporting materials for high-performance perovskite solar cells

Predictive Models for Thermal Behavior of Chemicals with Quantitative Structure-Property Relationships

Understanding and analyzing freezing-point transitions of confined fluids within nanopores

Curing kinetics and thermomechanical properties of latent epoxy/carbon fiber composites

Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency