Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Machining of various electrically non-conductive materials is possible with Spark Assisted Chemical Engraving (SACE). Even though this technology presents several interesting properties like simplicity, flexibility and the possibility to obtain very smooth ...
A new, low production cost, technique for the preparation of boron-doped diamond electrodes (BDD) is presented. The technique is based on mechanical implantation of BDD particles into a titanium substrate. The electrochemical characterization of low covera ...
Gravity-feed drilling is the most commonly used method for micro-hole drilling in glass with spark assisted chemical engraving (SACE). This paper proposes a method allowing the systematic characterization of this drilling method. The influences of voltage, ...
Spark assisted chemical engraving (SACE) is a method for 3D microstructuring of glass or other non-conductive materials with high aspect ratio and smooth surface quality. It is applicable for rapid prototyping of microfluidic devices, for MEMS interfacing ...
Spark-assisted chemical engraving (SACE) is a flexible, simple and inexpensive method for machining electrically non-conductive materials. SACE is particularly interesting because of the high drilling speed that can be achieved compared to other micromachi ...
Machining with electrochemical discharges is an unconventional technology able to machine several electrically non-conductive materials like glass or some ceramics. After almost 40 years of its first mention in literature, this technology remains an academ ...
Open source software have evolved into powerful tools for real-time control of mechatronic systems. They are of interest for academic purposes, as they promise high flexibility at low cost. In this paper, we investigate the performance of an open source co ...
Spark-assisted chemical engraving (SACE) is a promising micro-machining technology for the low-cost machining of holes and channels in non-conducting materials, such as glass and some ceramics. Despite the complexity of SACE due to the interdependency of t ...
Under gas evolution, the current voltage characteristics of an electrochemical cell are strongly affected by the presence of growing bubbles. At high current densities, the evolution of the bubbles becomes the rate limiting step of the electrochemical proc ...
Spark assisted chemical engraving (SACE) is an unconventional micromachining technology based on electrochemical discharge phenomena for glass and various ceramics. The limits of SACE with respect to small dimensions in the particular case of glass are exp ...