Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Renewed interest in the measurement of cellular K+ effluxes has been prompted by the observation that potassium plays an active and important role in numerous key cellular events, in particular cell necrosis and apoptosis. Although necrosis and apoptosis f ...
This communication presents the modeling and the first demonstration of very large deformation balloon actuators based on pyrotechnics on chip. The gas and pressure generated by the combustion of a solid propellant stored in a micromachined cavity lead to ...
This paper describes the fabrication technique for the realization a microfluidic flow cell to be integrated on a CMOS biosensor for DNA hybridization detection. The main element of the microfluidic system is made in polydimethylsiloxane (PDMS) elastomer a ...
IEEE Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2008
Four different conductive supports are analysed regarding their suitability for combined atomic force and scanning electrochemical microscopy (AFM-SECM) on biological membranes. Highly oriented pyrolytic graphite (HOPG), MoS 2, template stripped gold, and ...
Nanofabricated pores in 20 nm-thick silicon nitride membranes were used to probe various protein analytes as well as to perform an antigen-antibody binding assay. A two-compartment electrochemical cell was separated by a single nanopore, 28 nm in diameter. ...
The dynamics of formation of solute peaks in microfluidic systems are investigated by computer simulation. A finite-element numerical procedure is applied to analyze the diffusion- and flow-controlled concentration dispersion in a 40 μm-high rectangular fl ...
We present a thermally activated solvent bonding technique for the formation of embedded microstructures in polymer. It is based, on the temperature dependent solubility of polymer in a liquid that is not a solvent at room temperature. With thermal activat ...
A micro pump was integrated into a scanning force microscope probe for circulating liquid through its hollow cantilever and tip. The interior cross section of the cantilever was 2.25 mu m x 3.75 mu m. All fluidic parts were made of SiO2, while the tip apex ...
We are developing micromirror arrays (MMA) for future generation infrared multiobject spectroscopy (MOS) requiring cryogenic environment. So far we successfully realized small arrays of 5 x 5 single-crystalline silicon micromirrors. The 100 mu m x 200 mu m ...
SPIE-Intl Soc Optical Engineering, PO Box 10, Bellingham, Wa 98227-0010 Usa2008
We are fabricating a bulk-micromachined micromirror device for laser pulse shaping applications on femtosecond time scales. An array of micromirrors is used to individually retard or diminish certain laser frequencies spanning from the UV to the near-infra ...