Publications by Antonin Faes | EPFL Graph Search

Enhancing lifetime, forecasting, and economic benefits of photovoltaic technologies undergoing UV-induced degradation with optical filtering

Christophe Ballif, Antonin Faes, Christian Michael Wolff, Marion Solange Madeleine Dussouillez

Ultraviolet-induced degradation (UV-ID) of various PV cell types was analyzed under optical UV filters with different cutoff wavelengths. Cell types studied included interdigitated back contact (IBC), passivated emitter and rear totally diffused (PERT), an ...

2025

An accurate bifacial PV module energy performance model using a direct-diffuse power rating model

Antonin Faes

Predicting the energy output of a bifacial photovoltaic (PV) module is usually not as straightforward as for a monofacial module. The problem usually lies in the estimation of the back-side irradiance which strongly depends on the mounting conditions, trac ...

ELSEVIER SCI LTD2025

Characterization of Lightweight Polymeric Honeycomb Structures for Use as Backsides in Glass‐Free PV Modules

Christophe Ballif, Antonin Faes, Umang Bhupatrai Desai

In densely populated or mountainous countries where installation of large‐scale solar plants is challenging, photovoltaic (PV) modules in building applications offer a solution by transforming passive surfaces into energy‐generating systems. The need for f ...

Wiley2025

Novel Mechanically Robust and Environmentally Stable Light‐Weight Colored Photovoltaic Modules Based on Composite Polymer Backsheets

Christophe Ballif, Antonin Faes, Umang Bhupatrai Desai

Reliable and esthetically pleasing lightweight photovoltaic modules for building integration are expected to grow interest in the consumer market, especially for retrofitting older buildings and storehouses that are not structurally designed to withstand a ...

Wiley2025

Stress tolerance of lightweight glass-free PV modules for vehicle integration

Christophe Ballif, Aïcha Hessler-Wyser, Antonin Faes, Jacques Levrat, Umang Bhupatrai Desai, Gianluca Cattaneo, Fahradin Mujovi, Matthieu Despeisse

Electric vehicles (EVs) currently dominate the sales in the automotive market. A big leap in this market can be made by developing a photovoltaic product that can be integrated to an EV, as it can boost the driving range of the EV while reducing the chargi ...

Edp Sciences S A2024

Novel Lightweight PV Modules Based on Polymeric Honeycomb for Building Integration

Christophe Ballif, Antonin Faes, Umang Bhupatrai Desai

A reliable and aesthetically pleasing lightweight (LW) photovoltaic (PV) module for building integration is expected to develop a growing interest in the consumer market. However, its application is still limited by old buildings that are not structurally ...

Institute of Electrical and Electronics Engineers Inc.2024

Colouring solutions for building integrated photovoltaic modules: A review

Christophe Ballif, Aïcha Hessler-Wyser, Antonin Faes, Umang Bhupatrai Desai, Alejandro Borja Block

The conflict between PV installations and other land uses, such as forestry or agriculture, highlights the urgency for alternative solutions. Integrating PV technology into the built environment is a compelling strategy to mitigate these challenges, enabli ...

2024

Overview of key results achieved in H2020 HighLite project helping to raise the EU PV industries' competitiveness

Antonin Faes, Hugo James André Quest, Gizem Nogay, Giuseppe Galbiati, Ning Chen

The EU crystalline silicon (c-Si) PV manufacturing industry has faced strong foreign competition in the last decade. To strive in this competitive environment and differentiate itself from the competition, the EU c-Si PV manufacturing industry needs to (1) ...

WILEY2023

Stability of black interconnect coatings for solar photovoltaic module applications

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Martin Ledinsky, Alejandro Borja Block

Building-integrated photovoltaics (BIPV) are dual purpose, providing both energy and building functions. Aesthetics play a crucial role in the BIPV market, with increasing demand for uniformly colored modules for building skins. Achieving this requires hid ...

2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Jordi Escarre Palou, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023