Publications related to Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol

Amorphous Silicon Based Microchannel Plates for Time-of-Flight Positron Emission Tomography

Microchannel plates fabricated from hydrogenated amorphous silicon (AMCPs) are a promising alternative to conventional lead glass microchannel plates. Their main advantages lie in their cheaper and more flexible fabrication processes, allowing for adaptabl ...

EPFL2023

Brain morphometry in older adults with and without dementia using extremely rapid structural scans

Tobias Kober, Tom Hilbert

T1-weighted structural MRI is widely used to measure brain morphometry (e.g., cortical thickness and subcortical volumes). Accelerated scans as fast as one minute or less are now available but it is unclear if they are adequate for quantitative morphometry ...

ACADEMIC PRESS INC ELSEVIER SCIENCE2023

Multi-site, Multi-domain Airway Tree Modeling

Jiancheng Yang, Yi Wu, Ying Zhu, Boyu Zhang

Open international challenges are becoming the de facto standard for assessing computer vision and image analysis algorithms. In recent years, new methods have extended the reach of pulmonary airway segmentation that is closer to the limit of image resolut ...

Elsevier2023

Three-dimensional micro-CT images of UV-frozen flow fronts recorded at different flow regimes

Véronique Michaud, Jacobus Gerardus Rudolph Staal

Segmented micro-CT images of flow fronts produced by UV-flow freezing. Front morphologies correspond to capilary-dominated, equilibrated and viscous-dominated flow regimes. ...

Zenodo2023

3-D contact and pore network analysis of MICP cemented sands

Dimitrios Terzis, Nimisha Roy

The study describes a comprehensive methodology to evaluate X-Ray micro-computed tomography data from sand samples and to characterize their 3D microstructural properties. Fine and medium-grained sands are analyzed in their natural and bio-cemented states. ...

SPRINGER2023

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Bragg edge tomography characterization of additively manufactured 316L steel

Roland Logé, Christian Leinenbach, Nikola Kalentics, Markus Strobl, Efthymios Polatidis

In this work we perform a neutron Bragg edge tomography of stainless steel 316L additive manufacturing samples, one as built via standard laser powder bed fusion, and one using the novel three-dimensional (3D) laser shock peening technique. First, we consi ...

AMER PHYSICAL SOC2022

Medipix4, a high granularity four sides buttable pixel readout chip for high resolution spectroscopic X-ray imaging at rates compatible with medical CT scans

Viros Sriskaran

Medipix4 is the latest member in the Medipix/Timepix family of pixel detector chips aimed at high rate spectroscopic X-ray imaging using high-Z materials. The chip address the limitations of conventional hybrid pixel detectors for X-ray imaging. Its predec ...

EPFL2022

Micromechanically inspired investigation of cemented granular materials: part I-from X-ray micro tomography to measurable model variables

Gioacchino Viggiani, Edward Carlo Giorgio Andò

Cemented granular materials are abundant in nature and are often artificially produced. Their macroscopic behaviour is driven by small-scale material processes, which are generally classified as: grain breakage, cement damage and fragment rearrangement. Th ...

SPRINGER HEIDELBERG2022

Weakly Supervised Volumetric Image Segmentation with Deformed Templates

Pascal Fua, Pamuditha Udaranga Wickramasinghe, Patrick Moller Jensen, Mian Akbar Shah

There are many approaches to weakly-supervised training of networks to segment 2D images. By contrast, existing approaches to segmenting volumetric images rely on full-supervision of a subset of 2D slices of the 3D volume. We propose an approach to volume ...

Springer2022