Characterisation of high-burnup LWR fuel rods through gamma tomography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The European nuclear fuel cycle (covering the EU-27, Switzerland and Ukraine) was modeled using material flow analysis (MFA).The analysis was based on publicly available data from nuclear energy agencies and industries, national trade offices, and nongover ...
In recent years, higher discharge burn-ups and initial fuel enrichments have led to more and more heterogeneous core configurations in light water reactors (LWRs), especially at the beginning of cycle when fresh fuel assemblies are loaded next to highly bu ...
Gas cooling in nuclear power plants (NPPs) has a long history, the corresponding reactor types developed in France, the UK and the US having been thermal neutron-spectrum systems using graphite as the moderator. The majority of NPPs worldwide, however, are ...
The present doctoral research aims at the appraisal of nodal core simulators used for the calculation of commercial boiling water reactor (BWR) cores, against measurements carried out at the Paul Scherrer Institute under the LWR-PROTEUS experimental progra ...
In this paper, reconstructed local fission rates obtained with the two-group nodal diffusion program PRESTO-2, used at the Leibstadt Nuclear Power Plant (KKL) in Switzerland, are compared with experimental results and MCNPX calculations. The experimental f ...
In today's applied light water reactor (LWR) technology, the fissile material is embedded in a ceramic matrix, pressed, and sintered to pellets, which are then filled into the cladding tube of fuel pins that are assembled to a fuel bundle. This is the most ...
The complexation reactions between strontium (Sr2+) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) were studied at the aqueous vertical bar 1,2-dichloroethane (w vertical bar DCE) and aqueous vertical bar room-temperature ionic liqui ...
Advanced analytical techniques have been used to characterize nuclear materials at the Paul Scherrer Institute during the last decade. The analysed materials ranged from reactor pressure vessel (RPV) steels, Zircaloy claddings to fuel samples. The processe ...
The design and characterization of a passive neutron measurement station for highly burnt fuel has been undertaken at the Paul Scherrer Institute (PSI). The measurement station aims at the determination of the total neutron emission rate of full-length lig ...
Based on closed packed microspheres produced by internal gelation, the Sphere-pac concept provides a safer and cleaner process and better remote production capability compared to the traditional production of nuclear fuels. Whereas classical reactor fuel r ...
