Characterisation of high-burnup LWR fuel rods through gamma tomography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Until about the year 2030, current-day nuclear power plants (NPPs) will be replaced by so-called Gen-III or Gen-III+ units, which are mainly based on light water reactor technology. The principal new features are increased safety and improved economical ef ...
The safe and economic operation of nuclear power plants (NPPs) requires that the behaviour and performance of the fuel can be calculated reliably over its expected lifetime. This requires highly developed codes that treat the nuclear fuel in a general mann ...
The morphology of single PWR UO2 fuel rods has been investigated by employing computerised gamma-ray transmission tomography. Four highly burnt fuel rods of different burnups (from 52 GWd/t to 126GWd/t) and a fresh rod have been investigated. This paper de ...
The improvement of the "radiological cleanliness" of nuclear energy is a primary goal in the development of advanced reactors and fuel cycles. The multiple recycling of actinides in advanced nuclear systems with fast neutron spectra represents a key option ...
As part of a joint research programme between the Paul Scherrer Institute (PSI) and swissnuclear, with the co-operation of the Leibstadt nuclear power plant in Switzerland and fuel suppliers Westinghouse Sweden, measurements and calculations have been made ...
Non-destructive and destructive methods have been compared to validate their corresponding assessed accuracies in the measurement of 134Cs/137Cs and 154Eu/137Cs isotopic concentration ratios in four spent UO2 fuel samples with very high (52 and 71 GWd/t) a ...
Computerised gamma-ray emission tomography has been applied to single PWR UO2 fuel rods, with pellet averaged burnups of 52, 71, 91 and 126 GWd/t respectively, for the determination of 134Cs, 137Cs and 154Eu internal radial distributions. State-of-the-art ...
The growth of the porosity in high-burnup fuel is of particular interest when considering the effect of fission gas retention within the high-burnup structure (HBS). A mechanistic model of porosity growth under annealing conditions for light water reactor ...
The reaction-rate ratio C8/Ftot, neutron captures in 238U to total fissions, has been measured in 80 out of 96 fuel rods of a Westinghouse SVEA-96+ boiling water reactor fuel assembly. High-resolution gamma spectroscopy was performed on individual fuel rod ...
A measurement station has been built for the non-destructive investigation of burnt fuel rod segments through high-resolution gamma spectrometry. Four UO2 pressurised water reactor fuel rod segments with different burnup levels between 50 and 100GWd/t and ...
