Characterisation of high-burnup LWR fuel rods through gamma tomography
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A methodology is presented for the accurate assessment of the fast neutron fluence at the reactor pressure vessel (RPV) of a pressurised water reactor (PWR). The basis is the transfer of results from deterministic CASMO-4/SIMULATE-3 core-follow calculation ...
The system code RAMONA, as well as a recently developed BWR reduced order model (ROM), are employed for the stability analysis of a specific operational point of the Leibstadt nuclear power plant. This has been done in order to assess the ROM's applicabili ...
The behaviour of fission gas in high burnup fuel during steady-state and transient conditions is of special interest for safety reasons. Despite this, mechanistic models that reflect the fission gas transport processes and reliably predict the evolution of ...
High-resolution gamma spectroscopy was performed on individual fuel rods of a fresh, highly heterogeneous Boiling Water Reactor (BWR) fuel assembly, after irradiation at low power in the PROTEUS reactor at PSI, to determine the ratio of neutron captures in ...
The increasing complexity and heterogeneity of modern light water reactor (LWR) fuel assemblies impose new challenges to current reactor physics codes in terms of maintaining and improving the quality of neutronics predictions for the core. In particular, ...
Although the supercritical-pressure or high-performance light water reactor (HPLWR) concept is largely based on the well-established technological experience available with conventional light water reactors, there is still no consensus on various key desig ...
Fuel rods with burnup values beyond 50GWd/t are characterised by relatively large amounts of fission products and a high abundance of major and minor actinides. Of particular interest is the change in the reactivity of the fuel as a function of burnup and ...
From the neutronic viewpoint, the optimization of BWR core designs is strongly related to the accurate determination of flux variations inside and around fuel assemblies. These fluctuations, which are mainly due to the high heterogeneity of the fuel and mo ...
The design of modern BWR assemblies is governed by general requirements such as safe and reliable performance, optimal fuel utilization and cycle length, and a high degree of flexibility in reactor operation. These requirements are fulfilled via the use of ...
The deployment of a suitable, Pu-bearing inert matrix fuel (IMF) could offer an attractive option as a single-recycling LWR strategy aimed at reducing the currently growing plutonium stockpiles. A development programme focusing on yttria stabilized zirconi ...
