Full-wafer stencils fabricated by a DUV/MEMS process for high-throughput patterning of mesoscopic structures
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper describes a method of thin film and MEMS processing which uses self-assembled monolayers as ultra-thin organic surface coating to enable a simple removal of microfabricated devices off the surface without wet chemical etching. A 1.5-nm thick sel ...
We compare three different approaches to high-resolution contact lithography with special emphasis on contrast mechanisms for subwavelength structures. Masks with protruding metal absorbers, masks with absorbers embedded in the transparent background, and ...
Ferroelectric thin films for memory and MEMS applications require noble metal or refractory metal oxide electrodes. In this paper, physical and chemical parameters during etching of RuO2 and Pr by a dual frequency ECR/RF reactor have been investigated. The ...
Ferroelectric thin films for memory and MEMS applications require noble metal or refractory metal oxide electrodes. In this paper, physical and chemical mechanisms during platinum etching by a dual frequency ECR/RF reactor have been investigated. An ion be ...
This paper describes single and two layer processes to realize thick resist moulds (40 and 80 μm) with a good reproducibility. The patterning of a thick AZ 4562 photoresist layer is performed with standard photolithography equipment. Different problems rel ...
Light-coupling masks (LCMs) based on structured organic polymers that make conformal contact with a substrate can constitute an amplitude mask for light-based lithographies. The LCM is exposed through its backside, from where the light is differentially gu ...
We describe an approach to optical lithography using light-scattering contact masks with protruding elements that couple light into a photoresist. This method differs from conventional contact lithography in two important ways. First, because portions of t ...
Ferroelectric capacitive devices for memory and MEMS applications require patterned ferroelectric thin films with high anisotropic etched features. In this paper, physical and chemical parameters during etching of Pb(Zr0.53Ti0.47)O-3 (PZT) by a dual freque ...
We discuss the potential and limitations of Light-coupling masks for high-resolution subwavelength optical lithography. Using a three-dimensional fully vectorial numerical approach based on Green's tensor technique, the near-field distribution of the elect ...
A new approach for the realization of true 3D polymer structures is presented in this paper. It consists in adding, in a post-processing microstereolithography step, 3D polymer microstructures on top of a micropart patterned by means of planar processes su ...
