Surface Micromachining of Polyureasilazane Based Ceramic-MEMS using SU-8 Micromolds
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...
To respond to the rapid introduction and development of calcined clays as supplementary cementitious material (SCM), the toolbox of characterization methods for cementitious materials requires extension to raw clay characterization. Borrowing concepts and ...
The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...
Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...
EPFL2023
, , ,
Polymer derived SiOC and SiCN ceramics (PDCs) are interesting candidates for additive manufacturing techniques to develop micro sized ceramics with the highest precision. PDCs are obtained by the pyrolysis of crosslinked polymer precursors at elevated temp ...
ELSEVIER SCI LTD2018
Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...
SPRINGER HEIDELBERG2022
, , ,
Since materials science is of great importance, the application of composite materials based on carbon nanotubes (CNTs) is widely investigated. Current work is aimed at preparing nanocomposites of TiO2/MWCNT using an impregnation method combined with slow ...
Wiley-V C H Verlag Gmbh2014
, ,
Perovskite solar cells (PSCs) with mesoporous TiO2 electron transport layers have reached > 22% efficiency at laboratory scale ( < 1 cm(2)), however, these layers are fabricated using spin-coating, which is not conducive to large-scale or high throughput f ...
ELSEVIER SCIENCE BV2019
,
This poster shows simulation results of trasngranular fracture percentage in the ceramic microstructure under tensile loading. Moreover, the crack face roughness was investigated for microstructures with different grain sizes. ...
2014
, , ,
Recently organicinorganic hybrid perovskites have attracted attention as light harvesting materials in mesoscopic cells. While a considerable number of deposition and formation methods have been reported for the perovskite crystalline material, most involv ...
