Anode dusting during the electrolytic production of aluminium
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In searching for a suitable semiconductor material for hydrogen production via photoelectrochemical water splitting, alpha-Fe2O3 received significant attention as a promising photoanode due to its band gap (similar to 2.1 eV), good stability, low cost, and ...
Miniaturized, low temperature Solid Oxide Fuel Cells (SOFCs) that operate below 600 °C are promising for supplying electrical power to portable devices. Thin electrolyte membranes of less than one micrometer thickness have been shown to yield reasonable po ...
The anodic dissolution of 100Cr6 steel in neutral electrolytes containing sodium chloride and sodium nitrate was investigated potentiodynamically and galvanodynamically with a rotating disc electrode at room temperature. The total concentration of the mixe ...
We demonstrate ultralow leakage current AlGaN/GaN Schottky-barrier diodes (SBDs) based on a 3-D anode contact. In contrast to conventional AlGaN/GaN SBDs, this new device forms a Schottky contact directly to the 2-D electron gas (2-DEG) at the sidewalls of ...
Lifetime and durability issues connected with Solid Oxide Fuel Cell (SOFC) technology are strongly related to the amount of contaminants that reach the stack. In this study the focus is on organic silicon compounds (siloxanes) and their highly detrimental ...
Nickel oxide and yttria doped zirconia composite strength is crucial for anode-supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This ...
Iridium dioxide electrodes form part of the dimensionally stable anodes (DSA®) and this electrode material is widely used in many industrial processes namely water electrolysis, metal electro-winning, cathodic protection and electro-organic synthesis due t ...
The weakness of nickel-based solid oxide fuel cell anodes is their low ability to withstand re-oxidation at working temperature, especially for the anode-supported cell design. The volume expansion coming along with nickel (Ni) oxidation induces stresses i ...
La 0.8Sr 0.2CrO 3 (LSC) based Ru catalysts are very active in methane steam reforming. Nevertheless, they can be easily poisoned under water-deficient conditions. Ru can be deposited as metallic ruthenium particles decorating the LSC grains or be inserted ...
This work aimed to set new guidelines for the quantification of Cr accumulation in solid oxide fuel cell cathodes after operation, and enabled to pinpoint a diffusion-controlled tolerance to Cr-poisoning for increased cathode thickness; the additional cath ...
