Transverse cracking in the bulk and at the free edge of thin-ply composites: experiments and multiscale modelling

Related publications (29)

About
Privacy
Disclaimer

Graph Chatbot

Soft functional fibers for mechanical sensing and actuation

The measurement and generation of mechanical deformations is a key functionality in health monitoring, human-machine interaction, and soft robotics. However, current methods typically rely on small and hard transducers, which result in poor performance, cu ...

EPFL2021

Improving delamination resistance through tailored defects

John Botsis

Delamination is a well-known damage mode exhibited by laminated composites which has been extensively studied in unidirectional laminates (UD). In this work, a novel strategy consisting of the introduction of a small interlaminar defect to enhance the frac ...

2020

Experiments and numerical modelling on angle-ply laminates under remote mode II loading

John Botsis, Georgios Pappas, Charlie Joseph Simon Blondeau

Delamination is a very frequent damage mechanism that affects the integrity of laminated composites. In this study, the effect of ply orientation on crack growth resistance was analyzed for three different anti-symmetric interfaces (+/- 30 degrees, +/- 45 ...

ELSEVIER SCI LTD2020

Mechanical properties of natural fiber composites produced using dynamic sheet former

Composites formed from wood fibers and man-made cellulosic fibers in PLA (polylactic acid) matrix, manufactured using sheet forming technique and hot pressing, are studied. The composites have very low density (due to high porosity) and rather good elastic ...

2020

Centimeter-scale gas-sieving nanoporous single-layer graphene membrane

Kumar Varoon Agrawal, Luc Sébastien Bondaz, Mostapha Dakhchoune, Shiqi Huang, Guangwei He, Wan-Chi Lee

High-permeance, molecular-sieving, nanoporous single-layer graphene (NSLG) membranes are highly promising for gas separation. However, the formation of cracks during the transfer of NSLG to a low-cost porous support is difficult to avoid. These cracks are ...

2020

A comparative study of mode I delamination behavior of unidirectional glass fiber-reinforced polymers with epoxy and polyurethane matrices using two methods

John Botsis, Georgios Pappas

The mode I delamination behavior of a unidirectional glass-fiber reinforced polymer with a prototype elasto-plastic polyurethane matrix (GF/PU) was investigated and compared with that of glass/epoxy (GF/EP) using double cantilever beam specimens. Fracture ...

PERGAMON-ELSEVIER SCIENCE LTD2019

Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites

Sébastien Kohler

In this work, the damage dependency on ply thickness is investigated experimentally for three different thin-ply CFRP quasi-isotropic laminates, with constituents spanning a large range of properties. It is shown that free edge damage mechanisms, observed ...

EPFL2019

Thermal Drawing of Polymer Nano-composites: Fluid Dynamic Analysis and Application to Novel Functional Fibers

Alexis Gérald Page

The thermal drawing process is emerging as a versatile platform for the development of multimaterial fiber devices and advanced textiles for sensing, energy harvesting or medical applications, owing to the possibility to integrate insulators, conductors an ...

EPFL2019

Influence of ply-angle on fracture in antisymmetric interfaces of CFRP laminates

John Botsis, Georgios Pappas, Charlie Joseph Simon Blondeau

Laminated composites are prone to fracture at layer interfaces. Such damage impairs their structural response and engenders important constraints in design. In this work, the influence of ply orientation on crack growth resistance was studied for three dif ...

ELSEVIER SCI LTD2019

Two-dimensional crack growth in FRP laminates and sandwich panels

Aida Cameselle Molares

Fiber-reinforced polymer (FRP) composite materials are currently being selected for the design of lightweight and efficient structural members in a wide number of engineering applications. Sandwich panels with glass fiber-reinforced polymer (GFRP) face she ...

EPFL2019

Page 2 of 3

A comparative study of mode I delamination behavior of unidirectional glass fiber-reinforced polymers with epoxy and polyurethane matrices using two methods

John Botsis, Georgios Pappas

PERGAMON-ELSEVIER SCIENCE LTD2019