Comportement structural des bétons de fibres ultra performants en traction dans des éléments composés
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This paper describes 14 tests on simply supported and continuous reinforced concrete beams which were designed to investigate the influences of aggregate type, loading arrangement and shear reinforcement ratio on shear strength. The beams were rectangular ...
Reinforced concrete flat slabs are extensively used in buildings and parking garages. Their design is governed by deflection at the serviceability limit state and punching shear at the ultimate limit state. When no punching shear reinforcement is provided, ...
Over the past century, the use of flat slabs in buildings and especially in parking garages has been growing as it is an economic and efficient solution. Flat slabs are easy to build and have, through their smaller depth, an economical and architectural ad ...
Ultra High-Performance Fibre-Reinforced Concrete (UHPFRC) combines high strength, deformation capacity and low permeability. This makes UHPFRC particularly suitable as a strengthening and protective layer for application to existing reinforced concrete str ...
An emerging technique for strengthening of reinforced concrete (RC) slabs is to add a layer of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) with steel rebars as an external tensile flexural reinforcement. This paper presents the results of an ...
The influence of shear on the rotation capacity of one-way slabs without shear reinforcement is investigated in this paper by means of an experimental study. The experimental program consisted of 11 slab strips 8400 mm (331 in.) long and 450 mm (17.7 in.) ...
Punching shear reinforcement is increasingly used in flat slabs as an effective solution to increase their strength and deformation capacity. Several punching shear reinforcing systems have been developed in the past, such as studs, stirrups or bent-up bar ...
Novel photo-Fenton catalysts were prepared by immobilizing iron species on commercial bentonite plates via two methods: (1) ion exchange reaction (Fe3+ vs. Na+) by aqueous suspension powder-clay/FeCl3 followed by plate preparation, and (2) forced hydrolysi ...
Bent-up bars were extensively used as shear reinforcement in beams and slabs from the first R/C developments up to the 1970’s. Their use was justified by the fact that they allowed enhanced development of the tensile reinforcement at the same time they act ...
To generate high-level redundancy for structural glass beams, a novel concept of laminating a metal reinforcement to a structural glass beam has been developed at Delft University of Technology (TU Delft). This concept makes use of the relatively stiff pol ...
